Inserting And Removing Diskettes - Epson Endeavor L User Manual

Inserting and Removing Diskettes

To insert a diskette into a 3.5-inch drive, hold the diskette with
the label facing up and the shutter leading into the drive, as
shown in the following illustration. Slide the diskette into the
drive until it clicks into place.
To insert a diskette into a 5.25-inch drive, hold the diskette with
the label facing up and the read/ write slot leading into the
drive. When the diskette is completely in the drive, turn down
the latch to secure the diskette.
When you want to remove the diskette, make sure the drive
light is off; then press the release button or flip up the latch.
When the diskette pops out, remove it and store it properly.
Never remove a diskette or reset or turn off the computer
while a diskette drive light is on. You could lose data. Also,
remove all diskettes before you turn off the computer.
3 - 4 Using Your Computer
release button