Operation Panel And Key Function Introduction - Ricoma MT-1502 Quick Start Manual

Speed recommendations
• When embroidering caps, we recommend running the machine between 450 to 550
stitches per minute.
• When embroidering flats, we recommend running the machine between 650 to 850
stitches per minute.
OPERATION PANEL AND
KEY FUNCTION INTRODUCTION
MANUAL TRIMMING KEY:
Used to perform trimming during operation status and preparation status.
100 DEGREE KEY:
Automates the process of aligning the machine to 100 degrees.
FRAME SHIFT DIRECTION AND FRAME SHIFT SPEED KEY:
Used to adjust the movement of the frame along the pantograph rail and
the increments in speed.
DIRECTIONAL ARROWS:
Used to move the design up, down, left or right along the frame.
SPEED ADJUSTMENT KEYS:
Used to increase or decrease the speed of the machine.
TRACE DESIGN KEY:
Used to trace the design's start and end point.
RETURN TO ORIGIN KEY:
Used to return to the beginning of the design.
FRAME OUT KEY:
Used to offset the frame when creating appliqué.
Ricoma Quick Start Guide
53