Table of Contents
Advertisement
MOBILITY DHH800-MFC CONFIGURATOR INSTRUCTION MANUAL
To Disable Lockout
When you wish to use a
digit Lockout code when prompted and press Save. You will now be able to use the function or edit
the setting as normal. Entering an incorrect code will display the message "Incorrect Code" and allow
you to try again.
Changing the Lockout Code
To change the lockout code, disab
unit off, and follow the procedures outlined above.
3
.5.2 Backlight (off timer)
To conserve battery life, the Mo
a certain period of keypad inactivity. To change the backlight off timer on the unit, scroll Down to Backlight
and press Select. Scroll Up or Down to the auto shut-off time desired. Press Save to select the new value.
T
he shutoff timer can be disabled or set to shut off after time periods of from 1 minute up to 30 minutes.
N
OTE: The Backlight Off Timer is disabled when the optional AC Adapter (P/N 3KXD311800L0032) is
powering the Mobility MFC.
3
.5.3 Off Timer
To conserve battery
life, the Mobility DHH800-MFC series allows the user to set the unit to shut off after a
certain period of keypad inactivity. To change the off timer on the unit, scroll Down to Off Timer and press
Select. Scroll Up or Down to the auto shut-off time desired. Press Save to select the new value. The
shutoff timer can be disabled or set to shut off after time periods of from 1 minute up to 2 hours.
N
OTE: The Off Timer is disabled when the optional AC Adapter (P/N 3KXD311800L0036) is powering
the Mobility MFC.
3
.5.4 Clock Edit
The Clock Edit optio
n allows the user to correct the date and time of the Mobility MFC's internal clock. To
select the Clock Edit feature, make sure the pointer arrow is pointed to this selection. If not, scroll the arro
Down using the soft keys. Choose Clock Edit by pressing the Select soft key.
C
hoose a clock or date option to adjust by scrolling Up or Down. Press Select to choose that option. Enter
the correct value using the numeric keypad and text edit key if needed. When complete, press Done. You
will be asked if you wish to save the new data. Press Yes to accept the new value. Pressing No will take yo
back to the Clock Edit without making any changes to the Mobility MFC clock.
NOTE: When replacing the batteries, the date and time will remain active. An internal, 10
back-up battery continuously powers date & time information. This battery is not serviceable by th
user.
3
.5.5 Enter PC Comm. Mode
When the Mobility MFC is connecte
this manual), a DB-9 serial cable is used. Occasionally a DB-9 Serial cable is encountered that does not
have a DTR line. The DTR line is important to the update process because it is used to initiate and confirm
communication between the two machines. If a DB-9 cable without a DTR line is used, the Mobility MFC
must be manually placed in the Enter PC Comm. Mode. Go to the Mobility MFC Main display and select
Mobility MFC. Scroll down to the Enter PC Comm. Mode menu option and press Select. Proceed with
update and cycle Mobility MFC power when the update is complete. It is recommended to use fresh
batteries or an AC adaptor during update procedures. This mode will automatically time-out after app
minutes of inactivity and return to the main display.
3-4
function or edit a value that is protected by the lockout code, enter the three
le the lockout function for all the parameters selected, shut the
bility DHH800-MFC series allows the user to set the backlight to shut off after
d to a PC for updates via DPC Manager (see DPC Manager section in
w
u
-year life
e
rox. 2
Advertisement
Table of Contents
