Epson Stylus Pro 7880 User Manual page 165

Message
COMMAND ERROR
CHECK DRIVER
SETTINGS
CONVERSION CRTG LIFE
CONVERSION CRTG
NEAR END OF SERVICE
LIFE
CONVERSION CRTG LIFE
REPLACE CONVERSION
CRTG WITH A NEW ONE
COVER OPEN
CLOSE COVER
F/W INSTALL ERROR
UPDATE FAILED
RESTART THE PRINTER
INK CARTRIDGE
INSTALL INK CARTRIDGE
INK CARTRIDGE
NON-GENUINE
CARTRIDGE! MAY NOT
PERFORM AT OPTIMUM.
CONTINUE?
<YES NO>
INK CARTRIDGE
PLEASE USE GENUINE
EPSON INK CARTRIDGES
INK CARTRIDGE
REPLACE INK
CARTRIDGE
Explanation
You may be using the wrong
printer driver.
Damaged data was sent to the
printer or the data has an
incorrect command.
The driver's ink type
configuration is not correct for
the ink in the printer.
The conversion cartridge will
need to be replaced soon.
(Remaining service life is
displayed on the LCD.)
The conversion cartridge needs
to be replaced.
Front cover is open.
Firmware update failed.
An ink lever is raised, but no
cartridge is installed.
A non-genuine ink cartridge is
installed.
A non-genuine ink cartridge is
installed.
Ink cartridge(s) are expended
(printing stops).
Response
Press and hold the
3 seconds to cancel the print job. Make sure
you installed the correct driver for your printer.
Make sure the ink configuration is correct (see
page 148).
Press the Pause button to continue.
Replace the conversion cartridge with a new
one. Or, complete the replacement of black ink
by pressing the
Close the front cover.
Restart the printer, then update the firmware
again; see page 42 for instructions.
Install the missing ink cartridge.
Press the r button to select NO and replace
the ink cartridge with a genuine Epson ink
cartridge; see page 141. Otherwise, press l to
select YES.
Replace the ink cartridge with a genuine Epson
ink cartridge; see page 141.
Replace the ink cartridge(s) indicated on the
LCD display; see page 141.
165
Solving Problems
Pause button for
Pause button.
| 165