Insignia NS-PCGV30 Quick Setup Manual

QUICK SETUP GUIDE
Essential PC
Gaming Chair
NS-PCGV30
PACKAGE CONTENTS
Wheels (5) Star base Center
support post
Seat bottom Right arm Left arm
5/16" × 3/4" 1/4" × 1" Arm caps (8)
screw (4) screw (8)
FEATURES
• Seat height adjusts to fit your body
• Swivel and tilt mechanism lets you customize the chair to your preferred position
• Sturdy, 5-pointed star base with wheels makes it easy to move around
• Black design with white trim grants a modern, sleek look
• Made with quality materials for dependable stability
Before using your new product, please read these instructions to prevent any damage.
ASSEMBLING YOUR CHAIR
1 Turn the star base (B) upside down on carpet or a soft towel.
2 Insert the wheel (A) posts into the holes at the ends of the star base arms until they click into place.
3 Turn the base right side up, then insert the bottom of the center support post (C) into the hole in the center
of the star base (B). Put the center post cover (D) on the center support post (C).
Center Riser mechanism
post cover
Allen
wrench
Seat back
4 Turn the seat bottom (F) upside down and place it on a padded box or small stool to support it.
Spare parts:
5/16" × 3/4" screw
Quick Setup
1/4" × 1" screw
Guide
Arm cap
5 Align the riser mechanism (E) on the bottom of the seat (F) and attach it to the seat with four
screws (K). Tighten the screws with the Allen wrench (J).
6 Lift the seat bottom (F) and turn it right side up, then align the hole in the riser mechanism (E) with the
center support post (C) and press the seat down until it clicks into place.
7 Attach the left arm (H) and right arm (G) to the seat bottom (F) by using four
tighten the screws fully using the Allen wrench (J).
5/16" × 3/4"
1/4" × 1" screws (L) and