Escp2 Menu; Driver Settings - Epson EPL-N2550 Series User Manual

Note:
❏ Binary can only be used with network connection.
❏ You do not have to select On when using AppleTalk.
To use the Binary data, make sure your application supports
Binary data and that SEND CTRL-D Before Each Job and SEND
CTRL-D After Each Job are set to No.
When this setting is set to On, you cannot use TBCP (Tagged binary
communication protocol) and Job Management in the printer

driver settings.

Text Detection
When you select On, the text file is converted to a postscript file
when printing. This setting is available only when you select PS3
in the Emulation Menu.

ESCP2 Menu

This menu allows you to make settings which affect the printer
when it is in the ESC/P 2 emulation mode.
172
Using the Control Panel