AQL THUNDER - Dual Driver Splashproof Portable Speaker Quick Start

Overview

Description:

1. Multifunction button
2. FF / Volume + button
3. Rew / Volume - button
4. LED
5. Aux port
6. Micro-USB charging port
7. Micro-USB charge cable
8. Microphone
9. NFC

PRELIMINARY OPERATIONS

Recharging the battery

Insert the charging cable (7) into any USB port and connect it to the Micro-USB charging port (6) on the device. The red LED (4) will light up while the battery charges and will turn off when charging is complete.

Pairing the device with a mobile phone

With the device off, press and hold down the MF button (1) until the blue LED (4) flashes quickly (around 5 seconds).
Release the button. Now, follow the instructions on your mobile phone to search for the device. Your mobile phone will find THUNDER. If the phone asks for a PIN to pair the unit, enter "0000" (4 zeros).
When pairing is complete, the blue LED (5) will light up steadily.
If pairing is unsuccessful, turn the unit off and try again.

if the device or mobile phone has been turned off or placed out of range, to pair them again, it may be necessary to access the mobile phone menu or simply to press the MF button (1) as if you were answering a call.

To power the device ON

Hold down the MF button (1) until the blue LED (5) turns on (around 3 seconds).

To turn the device OFF

Hold down the MF button (1) for around 3 seconds.

Pairing using NFC

Turn on NFC on your phone and move THUNDER close to the NFC sensor (9). Bluetooth on the phone will automatically be turned on, and the phone will ask you to connect to the device.

PLAYING MUSIC

With phones featuring an A2DP stereo profile, music can be played by using the controls on the unit.
Play/Pause: press the MF button (1)
FF: press and hold down the FF / Volume + button (2)
Rew: press and hold down the Rew/ Volume - button (3)

HANDLING CALLS

To answer a call: press the MF button (1) briefly.
To end a call: press the MF button (1) briefly.
Adjusting the volume: press the Volume + or Volume - buttons (2-3).
Flat battery indicator: the LED (4) flashes red when the battery is flat.

TECHNICAL SPECIFICATIONS

Bluetooth Specifications: v4.1
Bluetooth Frequency Range: 2.4G~2.6G
Profiles: Headset - Handsfree - A2DP - AVRCP
Range: 10 m
Playback time: up to 10 hours*
Stand-by time: 4000 hours
Recharge time: approx. 5 hours
Micro-USB port Voltage: 5V
Micro-USB port current: 700A
Impedance: 4 Ω
Sensitivity: 85~90 dB
Frequency Range: 80Hz~18KHz
Output power: 2x4.3W (under 1% THD); 2x5.4W (under 5% THD)
Dimensions: (LxWxH): 17x7x7 (cm)
Weight: 400g
Battery Voltage: 3.7V
Battery Capacity: 2200 mAh
Effective Radiated Power: 0dBm

Cellularline S.p. A.
Via Lambrakis 1/A, 42122 Reggio Emilia, Italy
www.cellularline.com

Videos

Cellularline AQL Thunder Unboxing Video

Documents / Resources

References

• CellularLine Site WW | Homepage

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download AQL THUNDER - Dual Driver Splashproof Portable Speaker Quick Start