Pergola kits USA GRAND CEDAR PAVILION Assembly Manual page 4

1
1.
2
3
4
Template Assembly
Your pavilion kit includes a
wooden template that you
will use to mark your post
locations. You will notice that
two of the 2x4 boards have a
marking near the ends. You
will build a box that will reveal
the outside corners of the posts
when properly placed.
Arrange the template pieces
so that they are positioned in
the exact location of where
your pavilion will be placed.
The boards with the marking
on the end will be across from
each other. The marks will show
where the other boards will be
attached to create th is box.
Connect the corners of the
template pieces by driving two
2½" screws through the side of
the template boards. On larg-
er pavilions, your template will
be spliced. Match the letters,
then fasten them together with
2 ⁄ " screws.
1
2