Table of Contents
Advertisement
Quick Links
Review assembly drawings carefully and follow the care instructions. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging any surfaces.
Identify and separate all frame tubes and connectors, so they are easy to identify during assembly.
Ensure all tubes get fully inserted into the connectors. A tighter and smaller frame enables the
STEP 1
2: 5
4: 5
G2094
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
MINI GREENHOUSE
HB-535 • HB-726
Recommended Tools
(not included)
Rubber Mallet
FRAME ASSEMBLY
HELPFUL HINTS
greenhouse cover to slide on easily.
x5
/
/
Order/Customer Reference Number:
No.
1
2
3
4
5
6
No.
A
E
TIP: To avoid pinching your fingers, angle the tube with the
torsion spring so the spring is on the inside the other tube, then
align the tubes so they are straight and push them together.
Firmly insert the narrow end of Horizontal Tube
w/ Torsion Spring (4) with Horizontal Tube (2) as
indicated in the drawing.
Repeat this step with the four remaining sets of
tubes.
10/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Parts
Vertical Tube
Horizontal Tube
Roof Tube
Horizontal Tube
w/ Torsion Spring
Base Side Tube
Cover
Connectors
3-Way Elbow
Fitting
Tee Fitting
Qty.
4
5
4
5
2
1
Qty.
6
4
Page 1 / 4
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor MINI GREENHOUSE HB-535
Summary of Contents for Sunnydaze Decor MINI GREENHOUSE HB-535
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 STEP 2 TIP: Push the connectors onto the tubes. Then, 2+4: 2 gently tap the connectors with a rubber mallet to Firmly connect four 3-Way ensure components are tightly fitted. Elbow Fittings (A) to two Base Side Tubes (5) and two sets of Horizontal Tube (2+4) as indicated in the diagram.
- Page 3 General Use & Care We cannot foresee every possible scenario or climate in which this greenhouse could be used. Information provided is a basic guide and may not be suited for your particular needs. Use sound judgment when using your new greenhouse. CHOOSING A LOCATION Place your greenhouse on raised, level ground to ensure good drainage.
- Page 4 The following situations are not caused by faulty materials or workmanship and are not covered by warranty: • If cover tears due to incorrect frame assembly or being forced onto the frame. • If the cover tears due to water accumulating on the roof. Water accumulation can cause the cover to stretch and possibly collapse the greenhouse completely.
Need help?
Do you have a question about the MINI GREENHOUSE HB-535 and is the answer not in the manual?
Questions and answers