Advertisement
Positioning and drilling the holes (2)
定位打孔（ 2
Mount the equipment onto the bolts installed on the wall. Then, use the marker pen to mark the positions of
the mounting ears.
将设备挂在已安装好的墙壁螺栓上，然后用记号笔记录下面挂耳的打孔位置。
Remove the equipment and drill the holes at the marked positions.
取下设备，根据记录位置打孔。
Marking the hole locations
标记打孔位置
When installing the chassis on the wall, place the fan assembly in the lower part of the chassis for heat dissipation.
墙面安装机盒时，风扇板要位于机盒下方，以利于机盒散热。
Installing the chassis on the wall
安装机盒到墙壁上
Big flat washer
大平垫
Small flat
Nut
Fan assembly
washer
螺母
风扇板
小平垫
M6x60 expansion bolt
M6×60的膨胀螺栓
12
Installing the PGND cable
安装保护地线
M4
PGND cable
1.4±0.14 N·M
保护地线
Ф8 holes with a
depth of 52 mm to
8
60 mm
Ф8、深度
52mm ～60mm的
孔
Advertisement
