Table of Contents
Advertisement
SAFETY TRAINING
1.
Safety is a primary concern in the design and
manufacture of our products. Unfortunately, our
efforts to provide safe equipment can be wiped out
by a single careless act of an operator or bystander.
2.
In addition to the design and configuration of
equipment, hazard control and accident prevention
are dependent upon the awareness, concern, pru-
dence and proper training of personnel involved in
the operation, transport, maintenance and storage
of this equipment.
3.
It has been said, "The best safety feature is an
informed, careful operator." We ask you to be that
kind of an operator. It is the
operator's responsibility to read
and understand ALL Safety
and Operating instructions in
the manual and to follow these.
Accidents can be avoided.
4.
Working with unfamiliar equipment can lead
to careless injuries. Read this manual, and the
manual for your tractor, before assembly or operat-
ing, to acquaint yourself with the machines. If this
machine is used by any person other than yourself,
or is loaned or rented, it is the machine owner's
responsibility to make certain that the operator,
prior to operating:
a. Reads and understands the operator's manuals.
b. Is instructed in safe and proper use.
5.
Know your controls and how to stop tractor, en-
gine, and machine quickly in an emergency. Read
this manual and the one provided with your trac-
tor.
6.
Train all new personnel and review instructions
frequently with existing workers. Be certain only
a properly trained and physically able person will
operate the machinery. A person who has not read
and understood all operating and safety instruc-
tions is not qualified to operate the machine. An
untrained operator exposes himself and bystanders
to possible serious injury or death. If the elderly
are assisting with farm work, their physical limita-
tions need to be recognized and accommodated.
SAFETY SIGNS
1.
Keep safety signs clean and legible at all times.
2.
Replace safety signs that are missing or have be-
come illegible.
3.
Replaced parts that displayed a safety sign should
also display the current sign.
4.
Safety signs are available from your authorized Dis-
tributor or Dealer Parts Department or the factory.
How to Install Safety Signs:
•
Be sure that the installation area is clean and dry.
•
Be sure temperature is above 50°F (10°C).
•
Determine exact position before you remove the
backing paper. (See Section 3).
•
Remove the smallest portion of the split backing
paper.
•
Align the sign over the specified area and carefully
press the small portion with the exposed sticky
backing in place.
•
Slowly peel back the remaining paper and carefully
smooth the remaining portion of the sign in place.
•
Small air pockets can be pierced with a pin and
smoothed out using the piece of sign backing pa-
per.
5
Advertisement
Table of Contents
