Advertisement
5.
OPERATION
5.1
Before using the lamp the reel should be plugged into the mains socket.
5.1.2
Unhook the lamp from the stowage eye on the reel and begin to pull the cable out to the desired length/location. As you do so you will
hear the ratchet operating at regular intervals. When sufficient cable has been pulled out release the tension when the ratchet can be
heard operating in order to lock the cable.
WARNING! If the cable is released when the ratchet is silent, it will not lock.
p
p
5.1.3
Switch the lamp on using the switch on the handle and position the lamp to give the best light for the job in hand.
5.1.4
To retract the cable pull and release it when the ratchet is silent. Do not let go of the lamp but allow the cable to retract slowly. Stow
the lamp by hanging it by its hook through the eyelet on the red casing.
5.1.5
Switch the power off on the reel. If the unit is not to be used for some time unplug it from the mains.
WARNING! Reel tension is factory set, if any adjustment is required contact an authorised service agent. DO NOT remove
p
any of the screws on the black spring cover.
5.2
Thermal overload.
5.2.1
In the event of the reel being overloaded, the thermstatic trip will operate. If this occurs, disconnect the reel from the 230V supply
and then determine and rectify the cause of the overload.
5.2.2
Reconnect the reel to the power supply and the unit will automatically reset when cool.
6.
DECLARATION OF CONFORMITY
Declaration of Conformity: We, the sole importer into the UK, declare that the products listed below are in conformity with the following
standards and directives.
RETRACTING LEAD LAMP SYSTEM 15MTR
Models: CRM2301, CRM2302, CRM2303,
CRM2304 AND CRM2305
98/37/EC Machinery Directive
89/336/EEC EMC Directive
73/23/EEC Low Voltage Directive
93/68/EEC CE Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
The construction files for these products are held by the Manufacturer and may be
inspected, by a national authority, upon request to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
01284 757500
01284 703534
CRM2301, CRM2302, CRM2303, CRM2304, CRM2305 - 1- 120106
12th January 2006
www.sealey.co.uk
Web
sales@sealey.co.uk
email
Advertisement
