Advertisement
Quick Links
Please read all instructions before using this liquid cooling box and
keep this manual always at hand.
1
To guarantee your rights, please confirm the completeness
of the following information before you use it.
1.Liquid Cooling Box*1 (with rubber lid)
2.Black Dual Head Drain Plug*1
3.Water Tube*2
(with black and silver connectors attached to each end)
4.Hexagon Water Stopper*2
(it is connected to the Liquid Cooling Box)
5.User Manual*1
6.Other Accessories
CAUTION: This product is intended to be supplied by Power
Adapter, output rated 19.5Vdc, 11.8A or 19.5Vdc, 16.9A or
20Vdc, 14A.
CAUTION: : We conduct outgoing quality control (oqc)
with distilled water for each Liquid Cooling Box ensuring
a closed loop circuit where no leakage may occur.
CAUTION: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate this device.
The unit can be operated at an ambient temperature of
max. 35°C (95°F). Do not subject it to temperatures
below 5°C (41°F) or above 35°C (95°F).
CAUTION: Using unauthorized extension cables/tubes will
invalidate your warranty.
Tracer Liquid Cooling Box User Guide
MANRLCT011-P111
Advertisement
Summary of Contents for CyberPowerPC Tracer Liquid Cooling Box
- Page 1 Tracer Liquid Cooling Box User Guide Please read all instructions before using this liquid cooling box and keep this manual always at hand. To guarantee your rights, please confirm the completeness of the following information before you use it. 1.Liquid Cooling Box*1 (with rubber lid) 2.Black Dual Head Drain Plug*1...
- Page 2 Prepare your Liquid Cooling Box 1.Read the User Manual before operating Liquid Cooling Box. 2.Check if the (black and silver) connectors are attached to the Water Tubes firmly. 3.Gently remove the Hexagon Water Stoppers on the Liquid Cooling Box (do not throw it away, store it aside as it will be used later). 4.Gently attach (tighten the screws) the black connectors on the Water Tubes to the Liquid Cooling Box, make sure it is attached firmly and avoid twisting tubes.
- Page 3 Connect Liquid Cooling Box to the Laptop 1.Place the laptop on the desk, open the rubber flap on the rear side of the laptop. 2.Insert the silver connector in parallel to the laptop, you will hear a small click sound when attached correctly (note. refrain from twisting the Water Tubes and keep it at bent state instead of straightening the tubes).
- Page 4 Inject water into the Liquid Cooling Box 1.Open the rubber lid on the Liquid Cooling Box, note that the water injection hole is quite small (ventilation hole is on the right hand side), recommend using a syringe or funnel for assistance when injecting water.
- Page 5 Operate your Liquid Cooling Box 1.Plug in the power cord to the power socket. 2.Turn on the laptop and make sure the Bluetooth is turned on as well. 3.Press the power button on the Liquid Cooling Box and the LED indicator will start glowing.
- Page 6 Disconnect your Liquid Cooling Box 1.Disconnect the Bluetooth via application “Control Center”- “Performance” - “Liquid Cooling System Control”. 2.Turn off the power (of the Liquid Cooling Box) only when the fan stopped turning. Note. The mentioned steps apply to normal installation and usage of Liquid Cooling Box (e.g.
- Page 7 Disconnect the Water Tubes When you finished using the Liquid Cooling Box, and intend to disconnect the Water Tubes, please follow the instructions listed below: 1.Turn off the power by pressing the power button on the Liquid Cooling Box. 2.Gently squeeze the silver connector which is connected to the laptop and remove it from the laptop horizontally.
- Page 8 Change water or Travel If you are to change the water or need to travel, please follow the instructions listed below: 1.Since system operation may lead to accumulated heat in the silver connector, recommend removing the connector horizontally only after turning off the device.
-
Page 9: Product Overview
Product Overview Front side view/ Back side view Left side view/ Right side view The power cord can be stored around the base... - Page 10 Top side view/ Bottom side view Drain Pipes RGB LED DC Port Vents Power Connector Rubber Lid LED Indicator* Power Button *(Colors for BT/Pump injection water/ lightbar) 1. Water injection : Blinking(Purple color) 2. BT searching :Blinking (Blue color) 3. BT ready : on (Blue color) 4.
- Page 11 Trouble Shooting Guide 1.If water leakage occurs: please disconnect the device immediately and check if Liquid Cooling Box’s ports are connected firmly, all ports should be tightened to ensure all pipes are sealed. 2.Check if the laptop and Liquid Cooling Box is paired properly via Bluetooth before activating the Liquid Cooling Box, if not: 2-1.
- Page 12 Note. 1.Due to different water quality, mineral water has higher chance if water scaling. 2.Coolant and chemical toxic liquid are not recommended. 3.Pleas do not connect to power before water injection (only turn on the power/ connect to power if it is filled with water). 4.IIF there is abnormal noise coming from the pump, this could be the result of air bubbles still trapped inside the tubes, Trouble shooting steps are as below:...
-
Page 13: Federal Communications Commission Interference Statement
Regulations Information CE compliance This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMC Directive 2014/30/EU, - Low Voltage Directive 2014/35/EU(equals A2 : 2013) , - RF Directive 2014/53/EU FCC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT... - Page 14 RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the Tracer Liquid Cooling Box and is the answer not in the manual?
Questions and answers