Summary of Contents for CIGMAN CM-701
- Page 1 User Manual Laser Level Mode: CM-701 Please read these instructions before operating the product. Contact us: support@cigmantools.com...
-
Page 2: Table Of Contents
Content Safety Notes ....................3 Intended Use......................4 Initial Operation......................5 Product Overview ....................6 Laser level........................6 Remote Control......................8 Operating Modes ....................9 Auto Self-leveling Mode..................9 Manual Mode......................10 Pulse Mode......................10 Specification ......................11 Troubleshooting ....................12 Maintenance ......................13 Three Years Warranty .................. -
Page 3: Safety Notes
Safety Notes Working safely with the measuring tool is possible when the operating and safety information are read completely and the instructions contained therein are strictly followed. Never make warning labels on the measuring tool unrecognizable. Save these instructions for reference. ·... -
Page 4: Intended Use
·Have the measuring tool repaired through qualified specialists using original spare parts. This ensures that the safety of the measuring tool is maintained. ·Do not allow children to use the laser measuring tool without supervision. They could unintentionally blind other people or themselves. ·Do not operate the measuring tool in an explosive environment, such as in presence of flammable liquids, gases, or dust. -
Page 5: Initial Operation
Initial Operation ·Protect the measuring tool against moisture and direct sunlight. ·Do not subject the measuring tool to extreme temperatures or variations in temperature. In case of large variations in temperature, allow the measuring tool to adjust to ambient temperature before putting it into operation. ·Avoid heavy impact to or falling down of the measuring tool. -
Page 6: Product Overview
Product Overview Laser level... -
Page 8: Remote Control
Remote Control : Control the vertical laser line at the front of the instrument. : Control the vertical laser line on the side of the instrument. : Control the horizontal laser line. : Control the brightness of the laser, there are 4 gears to adjust. -
Page 9: Operating Modes
Operating Modes Auto Self-leveling Mode · To switch on the measuring tool, slide Lock Switch to " " position. · Immediately after switching on, the measuring tool sends out 1 horizontal beam and 2 vertical beams with automatic leveling range of ±4º. Once the leveling is finished, the laser beams won’t flash anymore, the indicator glows green. -
Page 10: Manual Mode
Manual Mode In manual mode, the measuring tool won’t be self-leveling. It could be held by hand or placed on an inclined surface to project a rigid laser beam in any orientation. To switch on/off the measuring tool, press and hold the " "... -
Page 11: Specification
Specification Laser Class Class Ⅱ Laser Wavelength 505~550nm Leveling Accuracy ±1.5mm/5m Leveling / Compensation Range 4°± 1° Working Distance (Line) First Gear: 6 Hours Second Gear: 9 Hours Operating Time Third Gear: 15 Hours Forth Gear: 30 Hours Power Source 3.7V 4000mAh / Lithium Battery IP Rating IP54... -
Page 12: Troubleshooting
Troubleshooting Q: Couldn't turn off the laser level by pressing the key button when it is in Auto Self-leveling Mode. A: In Auto Self-leveling mode, the key button is used to set energy-saving mode (short-press) and set pulse mode (long-press). You can turn lock switch "... -
Page 13: Maintenance
Maintenance · Maintain and keep the measuring tool clean at all times. · Regularly clean the surfaces at the exit opening of the laser in particular, and attention to any fluff or fibers. · Wipe off debris using a moist and soft cloth, do not use any cleaning agents or solvents. -
Page 14: Three Years Warranty
This statement is in addition to your effective rights and does not injure your statutory rights. will repair, without charge, any defects due to faulty materials or CIGMAN workmanship for three years from the date of purchase provided that: • Proof of purchase is produced.
Need help?
Do you have a question about the CM-701 and is the answer not in the manual?
Questions and answers