AJAZZ NACODEX AK873 User Manual

Wired diy mechanical keyboard

Hide thumbs Also See for NACODEX AK873:

一、Backlight Adjustable: 22 Lighting Effects

FN+INSERT: Lighting switch,including 4 lighting effects

FN+DELETE: Lighting switch,including 4 lighting effects

FN+HOME: Lighting switch,including 4 lighting effects

FN+PGUP: Lighting switch,including 4 lighting effects

FN+PGDN: Lighting switch,including4 lighting effects

FN+SCROLL: Lighting switch,including 2 lighting effects

FN+UP: Brightness++,all indicators flash 3 times when adjusted to the limit gear

FN+DOWN: Brightness--all indicators flash 3 times when adjusted to the limit gear

FN+LEFT: Light effect direction adjustment(Direction to the left)

FN+RIGHT: Light effect direction adjustment(Direction to the right)

FN+-_: Light speed-, the backlight flashes 3 times at the limit

FN+=+:Light speed+,the backlight flashes 3 times at the limit

二、The FN+END Key Combination Turns On The Backlight Recording Mode:

1. Press FN+4~5(2 sets of custom lights,1~3 have 3 sets of backlight);

2. Press FN+END to enter the light recording mode(The indicator light flashes);

3. Enter the lighting recording content that the user needs;

4. After recording,press FN+END to save the content.

5.Clear Light Recording:Reset to clear the light recording.

Table of Contents

Need help?

Do you have a question about the NACODEX AK873 and is the answer not in the manual?

Page 1 一、Backlight Adjustable: 22 Lighting Effects FN+INSERT: Lighting switch,including 4 lighting effects FN+DELETE: Lighting switch,including 4 lighting effects FN+HOME: Lighting switch,including 4 lighting effects FN+PGUP: Lighting switch,including 4 lighting effects FN+PGDN: Lighting switch,including4 lighting effects FN+SCROLL: Lighting switch,including 2 lighting effects FN+UP: Brightness++,all indicators flash 3 times when adjusted to the limit gear FN+DOWN: Brightness--all indicators flash 3 times when adjusted to the limit gear FN+LEFT: Light effect direction adjustment(Direction to the left)
Page 2 三、To Enable Macro Mode: 1. Press the FN+\|key combination,the lights of numbers 1-5 are flashing; 2. Press any group of numbers 1-5 to select the macro key; 3. Enter the content of the macro key required by the user; 4. Press FN+\|again to save the macro content; 5.