Oil Life Reset - Chrysler PACIFICA HYBRID 2023 Manual

Stop Safely Vehicle Will Shut Off Soon
Stop Safely Vehicle Will Shut Off Soon Warning Message
This warning will be displayed on the instrument panel
display when the vehicle has determined an operational
issue will occur shortly, which will cause the vehicle's
propulsion system to turn off. If the light turns on while
driving, stop the vehicle in a safe location as soon as
possible. Have the vehicle transported to an authorized
dealer.
 This is a high priority message
 This message will be displayed continuously
 Cannot be cleared with button press
 A single chime will sound
O L R
IL IFE ESET
 Your vehicle is equipped with an engine oil change indi-
cator system. The "Oil Change Due" message will
display for approximately five seconds after a single
chime has sounded, to indicate the next scheduled oil
change interval has been reached. The engine oil
change indicator system is duty cycle based, which
means the engine oil change interval may fluctuate,
dependent upon your personal driving style.
 Unless reset, this message will continue to display
each time the ignition is cycled to the ON/RUN position.
 To reset the oil change indicator, refer to the following
procedure.
NOTE:
This procedure should only be performed after scheduled
maintenance is completed. Resetting oil life other than
when associated with a scheduled maintenance may
result in damage due to not properly maintaining the
engine oil.
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition in the
ON/RUN position (do not start the vehicle).
2. Push and release the up or down
button until the menu displays the "Vehicle Info"
screen.
GETTING TO KNOW YOUR INSTRUMENT PANEL
3. Push the left arrow button or right
button to access the "Oil Life" submenu.
4. Hold the OK button to reset the "Oil Life" to 100%.
NOTE:
This procedure must be completed within one (1) minute
of changing the ignition mode from OFF to RUN. Otherwise
you will need to cycle the ignition to OFF and then back to
RUN again (this is to prevent inadvertent resetting of the
oil life).
Secondary Method For Oil Life Reset Procedure
1. Without pushing the brake pedal, place the ignition
in the ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within 10 seconds.
3. Without pushing the brake pedal, place the ignition in
the OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset.
If necessary, repeat this procedure.
CAUTION!
arrow
If the instrument cluster instructs you to change the
engine oil, do not reset the service indicator without
changing the oil. Engine damage may result.
29
arrow
3