How To Use Ul-Mobi; Function; Ul-Mobi - Ulvac G-TRAN SW100-A Instruction Manual

11.

How to use UL-MOBI

This chapter describes the dedicated application "UL-MOBI".
The SW100 series can be connected to a Windows/Android device with UL-MOBI installed
that can be downloaded from the following site using a USB cable, and various settings
and status can be checked on the Windows/Android device.
※ Windows/Android device and USB cables are not included.
【UL-MOBI download site】
・ UL-MOBI for Windows (Supported OS: Windows10 or later, 64bit)
HP address
Device driver
A device driver is required to use UL-MOBI for Windows. UL-MOBI
can be started if the device driver is not installed, but Windows
*CAUTION*
cannot recognize the connection even if the SW100 is connected to
the Windows device with a USB cable. (It will be displayed as an
unknown device in the device manager.) Please check this manual,
Section 11.2.2 3) and install it if necessary.
・ UL-MOBI for Andoroid (Supported OS: Android6.0 or later)
Google Play Search by "UL-MOBI"
HP address
https://www.ulvac.co.jp/download/en/application/?category=1009
11.1.

Function

The following functions can be used by connecting SW100 and UL-MOBI.
Function
DATA
DATA LOGGING
SAMPLING
PRESSURE UNIT
ZERO/ATM POINT ADJUST
ADJUST CLEAR
SETPOINT1/2
OUTPUT
ADDRESS
https://www.ulvac.co.jp/download/en/application/?category=1009
or read the QR code on the right to install.
Contents
Pressure value and graph
display.
Data logger of pressure value
Check/change the sampling cycle
※Cannot be changed when data
logging is executed.
Check/change pressure unit
※Only compatible with UL-MOBI
display..
Perform zero point adjustment/
atmospheric pressure adjustment
Clear execution of zero point
adjustment and atmospheric
pressure adjustment.
Confirmation/change setpoint.
Check/change compatibility.
Confirmation/change address.
43
SK00-9663-EI-003-00
SW100-A SW100-R
□ □
〇 〇
〇 〇
〇 〇
■ －
■ －
● △
▲ －
－ △