Do you have a question about the BL4200C and is the answer not in the manual?
Questions and answers
Summary of Contents for Home & Camp BL4200C
Page 1
USER MANUAL Domestic flueless space heaterBL4200C Only for temporary use. Use only in well ventilated space. THE GUARD ON THIS APPLIANCE IS TO PREVENT RISK OF FIRE OR INJURY FROM BURNS AND NO PART OF IT SHOULD BE PERMANENTLY REMOVED...
INSTALL INSTRUCTION PANKING LIST OF SPAREPARTS INSIDE THE PACKAGE 1. HEATER MACHINE 2. 5 WHEELS 3. SCREWS 4. INSTALL TOOLS(SCREW DRIVER AND WRENCH) 1. Put down the bottom cabinet as 2. Lift up the top cabinet as per per arrow direction arrow direction 4.
Page 3
5. Fasten the top two screws. 6. Take out the cylinder holder and Connecting the left/right cabinets with top bend it to the right shape. cabinet by two butterfly screws. Fixing the left/right cabinets with bottom cabinet by 4 pcs M4 screws.
SAFETY PRECAUTIONS: 1. Always use the heater in accordance 1. Always use the heater in accordance with the operating instructions supplied with the operating instructions supplied with each heater. Keep these instructions with each heater. Keep these instructions in a safe place. in a safe place.
Page 5
TECHNICAL CHARACTERISTICS Type:BL4200C Domestic Flueless Space Heater, mobile, equipped with anti-tilt switch, oxygen depletion system and flame supervision device, Domestic flueless Space heater Model BL4200C □ I3+ □ I3B/P □ I3B/P □ I3B/P Appliance Category Burner type Atmospheric burner Siza of injector (mm) 0.59...
Page 6
CONNECTING THE CONTAINER 1. Use an approved regulator according to gas supply pressure and approved tubing having a length of 50cm and in no case longer than 1m. When connecting the regulator to the container avoid twisting of hose. 2. Slowly open the valve of the container and check if there is any gas leakage by brushing the connections with soapy water.
CONTROL BUTTON: 1.LIGHTING INSTRUCTION A.The heater has three settings. Lighting position(Pos.1)Minimum position (Pos.2) ; Medium position (Pos.3) Maximum position (Pos.4). B.Turn on the gas on the container. 2. LIGHTING: Use one hand Press down the control button for 10 seconds, at the same time press down the piezo igniter key with thumb finger of another hand.
WARNING Read these instructions before using this appliance. Use an approved regulator which is adjusted to the gas supply pressure required. Do not keep pressing the ignition button for more than 40 seconds. Never disconnect the regulator while container valve is open. Don’t change container with in areas in which open fire exists.
Page 9
FAULT FINDLING CHART SYMPTOMS FAULT REMEDY Pilot will light spark across Ensure that automatically. electrode gap. pizeo-electric igniter functioning correctly. Check that electrical lead damaged. Pilot will light Incorrect position of Re-position spark plug so automatically but points (a) spark in relation to that spark jumps across gas to (e) are satisfactory and pilot gas flow.
Need help?
Do you have a question about the BL4200C and is the answer not in the manual?
Questions and answers