Advertisement
3. SPECIFICATION
Model No: ...........................................RPS2KD (Rear Stand)
Model No: .......................................... FPS1KD (Front Stand)
4. ASSEMBLY
4.1.
Ensure all parts are present and in good order. DO NOT use parts other than those supplied.
4.2.
Ensure all fixings are correctly tightened and that frame members are securely fitted.
5. OPERATION
Ensure all fixings are correctly tightened and that frame members are securely fitted before each use.
9
5.1.
Adjust wheel supports to suit bike being loaded by loosening the thumb wheels. Retighten firmly when the correct width is set.
5.2.
If using FPS1KD then the suitable Rear stand should be used first to ensure the bike is supported
6. MAINTENANCE
6.1.
Clean with soft dry or lightly damped cloth.
6.2.
DO NOT use solvents or chemical cleaners.
6.3.
When the stand is not in use, store in dry, clean environment.
6.4.
Keep the stand clean and wipe off any oil or grease. Lubricate all moving parts with oil e.g. roller wheels.
6.5.
Before each use check all parts. If any part of the stand is damaged or defective, remove the stand from service and take the
necessary action to remedy the problem.
DO NOT use the stand if it is believed to have been subjected to abnormal load or shock. Inspect and take appropriate action.
8
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
RPS2KD, FPS1KD
Issue 1 19/07/22
REGISTER YOUR
PURCHASE HERE
Advertisement
