Plejd GWY-01 Instruction Manual page 3

Power adapter (supplied*)
100–230 V ~50/60 Hz 0.2 A
Output voltage: +5V DC 1 A
USB-C
*Supplied with DVE Switching Adapter, model no.
DSA-6PFG-05 FEU. Use only adapter listed.
Power consumption
0.6 W
External operating temperature
0 to +35 °C indoors
Dimensions
70x70x20 mm
LAN connection
Ethernet/RJ45
Radio
2.4 GHz mesh
Bluetooth
®
<10 dBm
Radio range
Approx. 10 m indoors
The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
Support
In the event of any technical questions, please contact our customer service:
support@plejd.com | +46 (0) 10 203 89 91
Pairing with HomeKit
You can add Gateway to HomeKit
in a few easy steps by using the
Apple Home app directly from
®
your iPhone or iPad
®
Apple Home app and follow the
instructions for adding an accessory.
Discovery Mode
To pair with HomeKit, the product needs
to be in Discovery Mode. Gateway is
automatically in Discovery Mode for
10 minutes after startup. To manually
enable Discovery Mode again, press the
button on top of Gateway once.
Important information
Do not use the product if it has visible
signs of damage. Clean the product with
a dry cloth.
This electrical product should not be
disposed of together with other household
waste. Contact your local recycling center
for guidance on electrical and electronic
equipment disposal.
®
. Open the
®