SKYDANCE T15 Installation page 2

Rotary Panel DMX Master & RF Remote
TM
Technical datasheet
Installation diagram
1. Remove the knob, then flip panel, inserted into the card edge aperture with
a small screwdriver, gently pr y and open the panel.
2. After connect wires, put bottom case into 86 bottom box, put in the screw
and tighten.
3. From top to bottom, moderately cover upper case,then mount knob,
complete installation.
NOTES:
●
In order to ensure safety, turn off the power first before wiring, ensure correct
wiring to avoid short circuit.
●
In the process of installation, don't push the knob hardly, so as not to loose
knob spindle and scratch panel.
@ Guangzhou Skydance Co.,ltd All rights reserved. We reserve the right without notice to amend the technical information and specifications.
T15
www.iskydance.com
bottom case upper case
Page 3
V 1.1
RGB change mode list
No. Name
1 Static red
2 Static green
3
Static blue
4
Static yellow
5
Static cyan
6
Static purple
7
Static white
8
7 color jump sectionally
9
7 color strobe sectionally
6 color smooth sectionally
10
Malfunctions analysis & troubleshooting
Malfunctions
No light
Wrong color
No response
from the remoter
Safety & Warnings
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, please ensure good
ventilation.
4. Please check if the output voltage of any power supplies used complywith the working
voltage of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to
avoid any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product
by yourself.
Warranty Agreement
1. 3-year warranty:
● The warranty is for free repair or replacement and covers manufacturing faults only.
● Do not include fees of on site maintenance and consumable parts.
2. Limited Warranty
● Artificial damage caused by improper use, such as use inappropriate power supply,
improper accessories, improper installation, did not follow the instructions, error using
or negligence.
● Any damages caused by force majeure, such as natural disaster, abnormal voltage.
● The normal use of products caused by aging, wear and tear, but it does not affect the
normal use.
@ Guangzhou Skydance Co.,ltd All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Rotary Panel DMX Master & RF Remote
TM
Technical datasheet
No. Name No.
21
11 RGB scanning
22
12 7 color scanning
23
13
RGB multi-scanning
24
14 7 color multi-scanning
25
15 R GB flow
26
16 7 color flow
27
17 R GB multi - flow
28
18 7 color multi-flow
29
19 B lue White chase
30
20 R GBW + Black chase
Causes Troubleshooting
1. No power.
1. Check the power.
2. Wrong connection or insecure.
2. Check the connection.
1. DMX decoder first address error. 1. Check the DMX first address.
2. Wrong connection of RGB wires. 2. Reconnect RGB wires.
1. Replace batter y.
1. The batter y has no power.
2. Beyond controllable distance.
2. Reduce remote distance.
3. The controller did not match the
3. Re-match the remoter.
remoter.
T15 Page 4
www.iskydance.com
V 1.1
Name
7 color chase
Blue meteor
White meteor
7 color meteor
Red Yellow float
Green Cyan float
Blue Purple float
RGBW+Black float
RGB+W float
6 color float