Advertisement
JumpSeat 90
Parts Included
9/16" Nut Driver
(Wood)
1/4"
Standard
Drill Bit
Tools Required
Seat
7/16" Nut Driver
(Concrete)
1/4"
Power Drill
Masonry
Drill Bit
Movable Base
Fixed Base
1
1/4"x3"
Concrete Anchors
3
Concrete
Anchor Caps
Hardware Included
2
3/8"x2"
Lag Screw
4
Lag Screw
Caps
5
5/32"
Allen Wrench
Advertisement
Table of Contents
Related Manuals for STOREMORESTORE JumpSeat 90
Summary of Contents for STOREMORESTORE JumpSeat 90
- Page 1 JumpSeat 90 Movable Base Seat Fixed Base Parts Included 7/16” Nut Driver 9/16” Nut Driver (Concrete) (Wood) 3/8”x2” 1/4”x3” Lag Screw Concrete Anchors Concrete Lag Screw Anchor Caps Caps 1/4“ 1/4“ Power Drill 5/32” Standard Masonry Allen Wrench Drill Bit...
- Page 2 JumpSeat 90 Floor Installation Concrete Wood Position the base on the floor and mark the hole Position the base on the floor and mark the hole locations. locations. Drill 3/16” pilot holes appox. 2” deep. Drill 3/16” pilot holes. Use Concrete Anchors to attach base to floor.
- Page 3 JumpSeat 90 Movable Base Assembly Loosen the bolts on the lower front panel with an Allen Tighten the bolts on the lower front panel with the Wrench. supplied Allen Wrench. Slide Jumpseat over the mounting base until it makes contact with the base plate.
Need help?
Do you have a question about the JumpSeat 90 and is the answer not in the manual?
Questions and answers