Sealey MS0381 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAFETY
WARNING! Ensure health & safety, local authority, and general workshop practice regulations are strictly adhered to when using
‰
this equipment.
Familiarise yourself with product application and limitations, as well as the specific potential hazards peculiar to this product.
9
Maintain the pump station in good condition (use an authorised service agent).
9
Replace or repair damaged parts. Use genuine parts only. Non authorised parts will invalidate the warranty.
9
Ensure safety eye protection, oil resistant gloves and protective clothing are worn when using this product.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
9
Keep children and unauthorised persons away from the working area.
9
After use, drain any fluids from the equipment before storage.
9
Dispose of waste liquids in accordance with local authority regulations.
9
Keep the oiler clean and store in a safe dry, childproof location.
9
WARNING! DO NOT allow uncontrolled discharge of fluids thus polluting the environment. All liquids must be disposed of
‰
according to local authority regulation
2. INTRODUCTION
Hydraulic cable oiler, forces oil between inner and outer cables throughout their entire length leaving them silky smooth. For use on brake,
throttle, speedo, choke, etc. cables. On motorcycle, car, bicycle, lawnmower cables that all require regular oiling as part of their servicing.
Easy to use and cleaner to service the most popular size cables between 6 to 10mm. Avoids replacing cables that are worn or seized.
Resulting in smooth operating cables.
3. SPECIFICATION
Model no.: .................................................................MS0381
4. CONTENTS
Item no. Description
1 Body
2 Ram
3 Compression Discs
4 Neoprene Collar
5 Pressure Cap
6 End Cap
© Jack Sealey Limited
CABLE OILER HYDRAULIC TYPE
MODEL NO:
Wear protective
Wear safety
gloves
footwear
6
Original Language Version
MS0381
Wear protective
clothing
1
2
3
4
5
MS0381 Issue 1 06/09/22