Samsung NE59J7630SS Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Ranges
  5. NE59J7630SS
  6. Service manual

Samsung NE59J7630SS Service Manual

Hide thumbs Also See for NE59J7630SS:
Table of Contents

Advertisement

Quick Links

FREE STANDING RANGE
FREE STANDING
RANGE
BASIC:
NE59J7630SS
MODEL:
NE59N6630SS
MODEL CODE:
NE59N6630SS/AA
CONTENTS
1.
Precaution
3. Disassembly and Reassembly
4. Troubleshooting
5. PCB Diagrams
6. Wiring Diagrams
7.
Schematic Diagrams

Advertisement

Table of Contents
loading

Related Manuals for Samsung NE59J7630SS

Summary of Contents for Samsung NE59J7630SS

  • Page 1 FREE STANDING RANGE BASIC: NE59J7630SS MODEL: NE59N6630SS MODEL CODE: NE59N6630SS/AA FREE STANDING RANGE CONTENTS Precaution 3. Disassembly and Reassembly 4. Troubleshooting 5. PCB Diagrams 6. Wiring Diagrams Schematic Diagrams...

  • Page 2: Table Of Contents

    • Contents 1. Precaution ....................3 1-1 Forward .

  • Page 3: Precaution

    • To avoid risk of severe personal injury or death, disconnect power before working/servicing on appliance to avoid electrical shock. • When the oven operates, the interior parts will be very hot. SAMSUNG Electronices assumes no responsibility for any repairs made on our products by anyone other than Authorized Service Technicians.

  • Page 4: Important Safety Instructions

    This document can not be used without Samsung’s authorization. 1. Precaution 1-3 Important Safety Instructions assistance contact your service agent or manufacturer. WARNING This symbol will help alert you to hazards or unsafe practices which could cause serious bodily harm or death.
  • Page 5 This document can not be used without Samsung’s authorization. 1. Precaution SURFACE COOKING UNITS • Important Instruction – In the event the self-clean mode “F” code goes on, • Use Proper Pan Size or three long beeps sound, oven is malfunctioning –...

  • Page 6: Model & Serial Number Label And Tech Sheet Locations

    This document can not be used without Samsung’s authorization. 1. Precaution 1-4 Model & Serial Number Label and Tech Sheet Locations This Model / Serial Number label and Tech Sheet locations are shown below. The rating plate is located above the drawer on the oven frame.

  • Page 7: Features

    This document can not be used without Samsung’s authorization. 2-1 Features Features Biggest Capacity Cooks large holiday meals. Turkey 24lbs = 4.4cu.ft Steam Cleaning - Samsung : 5.9cu.ft Casual clean without any smell More frequently - Samsung : Self Clean+ Steam Clean...
  • Page 8 This document can not be used without Samsung’s authorization. Items BASIC MODEL NEW MODEL Model Name Category Convection Convection Width Overall Installation type Freestanding Freestanding Color availability Oven Touch Touch Cooktop Knob Knob Display Control Electronic clock Control lock capability...

  • Page 9: Accessory

    This document can not be used without Samsung’s authorization. Item Rack Flat DG75-01001C...

  • Page 10: Removing The Assy-Frame Cooktop

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-1 Removing the Assy-Frame Cooktop Item How to use Pictures Screw driver Use for assembly and disassembly of all screws Use for assembly and disassembly of injector nozzles.

  • Page 11: Removing Cover-Back Main Wire, Cover-Back Guard Wire, Pcb-Main, And Pcb Sub

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-2 Removing Cover-Back Main Wire, Cover-Back Guard Wire, PCB-Main, and PCB SUB WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 12: Removing Regulator-Energy

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-3 Removing Regulator-Energy WARNING Disconnect power before servicing the range Replace all panels before operating range. Failure to do so can result in dearh or electrical shock.

  • Page 13: Removing Surface Elements And The Ceramic Glass Cooktop

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-4 Removing Surface elements and The Ceramic Glass Cooktop WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock..
  • Page 14 This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-4 Removing Surface elements and The Ceramic Glass Cooktop Parts Explanation Photo Explanation 4. Protect the cooktop surface and turn the assembly over. 5. To remove the surface elements...

  • Page 15: Removing The Latch-Door & Switch-Door Plunger

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-5 Removing The Latch-Door & Switch-Door Plunger WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.
  • Page 16 This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-5 Removing The Latch-Door & Switch-Door Plunger Parts Explanation Photo Explanation c) Remove the Switch-Door Plunger from the range. carefully pull out the switch while moving it up and down using pliers.

  • Page 17: Removing Heater-Broil

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-6 Removing Heater-Broil WARNING Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 18: Removing Heater-Bake

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-7 Removing Heater-Bake Parts Explanation Photo Explanation 1. Unplug range or disconnect power. 2. Pull the range out of its mounting location so that you can access the rear of the unit.

  • Page 19: Removing Convection Element, Fan-Covnection And Motor-Convection

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-8 Removing Convection Element, Fan-Covnection and Motor-Convection Parts Explanation Photo Explanation 1. Disconnect power and remove oven racks. 2. Pull the range out of its mounting location so that you can access the rear of the unit.

  • Page 20: Removing Lamp

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-9 Removing Lamp WARNING Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 21: Removing Sensor-Thermistor

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-10 Removing Sensor-Thermistor WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 22: Removing Assy-Drawer

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-11 Removing Assy-Drawer WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 23: Removing And Replacing Oven Door

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-12 Removing and Replacing Oven Door WARNING The door is very heavy. Be careful when removing door Do not lift door up by the Handle-Door. Parts Explanation Photo...

  • Page 24: Removing Handle-Door And Glass-Inner

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-13 Removing Handle-Door and Glass-Inner WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 25: Removing Handle-Door And Glass-Inner

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-14 Removing Handle-Door and Glass-Inner Parts Explanation Photo Explanation To remove Handle-Door Handle Door 1. Remove 2 screws to remove Handle-Door To remove Glass-Inner 1. Remove 6screws from rear side of door to remove 2 Hinge-Door.
  • Page 26 This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-14 Removing Handle-Door and Glass-Inner Parts Explanation Photo Explanation Glass-Inner Explanation Photo Explanation * Reassembly of All part is the reverse order of disassembly.

  • Page 27: Removing Gasket-Door

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-15 Removing Gasket-Door WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 28: 3-16Removing The Panel-Side

    This document can not be used without Samsung’s authorization. 3. Disassembly and Reassembly 3-16Removing The Panel-Side WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.

  • Page 29: Information Display Codes

    This document can not be used without Samsung’s authorization. 4. Troubleshooting 4. Troubleshooting 4-1 Information Display Codes Possible check codes during use can be checked before service. 1. Press ‘Clock’ pad. 2. Press a number ‘1,2,3,4’ pad. 3. Press the ‘START/SET’ pad.
  • Page 30 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-1 Information Display Codes Check code Displayed code CAUSE SOLUTION Disconnect power. Open the back cover. Disconnect sensor from the wire harness. sensor resistance is abnormal, replace oven sensor.
  • Page 31 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-1 Information Display Codes C-20 Disconnect power oven sensor Measure sensor resistance. Replace oven sensor *reconnect Check the connecting condition of harness *repair or replace damaged harness Measure resistance of connector...
  • Page 32 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-1 Information Display Codes Check code C-21 Convection Relay DLB Relay Disconnect power and sub PCB Broil Relay Bake Relay *DLB, Bake, Broil,convection relay check. * Replace main PCB.
  • Page 33 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-1 Information Display Codes C-d0 Connector *Disconnect power. *Take out membrane cable from the Sub PCB * Repair damaged/shorted area between * Check for shorts between connector *Check for short circuits between * Replace or repair Membrane touch.
  • Page 34 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-1 Information Display Codes C-d1 *Disconnect power. *Get rid of harness connected with Lock motor. Door lock motor * Replace micro switch or Lock motor. * Measure resistance of Lock motor Coil.
  • Page 35 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-1 Information Display Codes C-d1 CN470 CN200 *Disconnect power. on Sub PCB, Main PCB. Sub PCB Main PCB * Check whether harness is connected * Repair damaged harness or replace.
  • Page 36 This document can not be used without Samsung’s authorization. 4. Troubleshooting SYMPTOM DIAGNOSIS REMEDY Measure an input voltage. Check circuit breaker. Make sure power cable is connected correctly Measure an input voltage of terminal to terminal block. block. Make sure whether harness between...
  • Page 37 This document can not be used without Samsung’s authorization. 4. Troubleshooting SYMPTOM DIAGNOSIS REMEDY Make sure that keypad cable on sub PCB is connected correctly. loosen or disconnected. Keypad is not working partially or entirely PCB is not damaged. keypad cable has been loosen or disconnted.

  • Page 38: Electrical Malfunction

    This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction No Power Check the circuit breaker. Check terminal block voltage. Check the terminal block connections (240V,60Hz) Replace or Repair the wiring Check the wiring. Check the votage of PCB, SMPS...
  • Page 39 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction Troubleshooting (PCB failure) PCB Failure - Check the input voltage of Repair Faulty wiring - Check Terminal block PCB SMPS (input check- or PCB check voltage(240V).
  • Page 40 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction Cooktop No heating or Abnormal working *Single element Left Right(LR) LR radiant element (No heating or Disconnect power. *Repair or replace damaged harness. harness is normal.
  • Page 41 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction (Continued) LR radiant element (No heating or working abnormally) * Check LR cooktop radiant element. *Check whether harness is connected normally to the element LR .
  • Page 42 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction *Dual element Right Front(LF) LF radiant element (No heating or working abnormally) * Disconnect power * Check theLF infinite switch *Check whether wire harness is not...
  • Page 43 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction (Continued) LF radiant element (No heating or working abnormally) *Check LF radiant element. * Check whether wire harness is not damaged and connected correctly *Repair or replace damaged harness.
  • Page 44 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction *Single element Right Rear(RR) RR radiant element (No heating or Working paranormally) * Disconnect power * Check the RR infinite switch *Check whether wire harness is not...
  • Page 45 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction (Continued) RR radiant element (No heating or working abnormally) *Check RR radiant element *Check whether wire harness is not damaged and connected correctly *Repair or replace damaged harness...
  • Page 46 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction * ri le element Right Front(RF) RF radiant element (No heating or working abnormally) * Disconnect power * Check theRF infinite switch *Check whether wire harness is not...
  • Page 47 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction (Continued) RF radiant element (No heating or Abnormal working) *Check RF radiant element *Check whether wire harness is not damaged and connected correctly *Repair or replace damaged harness to RF radiant element.
  • Page 48 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction RC radiant element (No heating or Abnormal working) *Check RC radiant element. *Check whether wire harness is not damaged and connected correctly *Repair or replace damaged harness to RC radiant element.
  • Page 49 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction RC radiant element (No heating or working abnormally) * Disconnect power *Check PCB pattern and relay *Check warming center relay on main PCB. (RY207) for damage.
  • Page 50 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction hot surface indicator light failure * Disconnect power *Disconnect the harness from the Hot Surface indicator light. *Replace hot surface indicator light. *Connect power and Check the Hot Surfaceindicator light.
  • Page 51 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction Component testing procedures WARNING ELECTRICAL SHOCK HAZARD Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so can result in death or electrical shock.
  • Page 52 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction FIGURE TESTS MEASURE RESULTS First of all, make sure that lbulb is not broke or burned out. Measure resistance socket’s terminal after disconnecting the harness and Terminal voltage of lamp socket : 120V removing the bulb.
  • Page 53 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction FIGURE TESTS MEASURE RESULTS Check whether harness is connected with switch properly. L1 : black + black L2 : red + red P : yellow H1 : white...
  • Page 54 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction FIGURE TESTS MEASURE RESULTS Check whether harness is connected Approx with terminal of element properly. Terminal resistance : A : orange 2a : brown 1b : yellow + black 2b : yellow+yellow 2a - “A”...
  • Page 55 This document can not be used without Samsung’s authorization. 4. Troubleshooting 4-2 Electrical Malfunction degree F degree C ohms degree F degree C ohms -17.8 932.12 1170.17 961.86 1188.93 980.95 1374.93 1000.00 1558.01 1019.02 1738.06 1038.02 1915.39 1056.99 2089.69 1075.92 2261.07...

  • Page 56: Pcb Diagrams (Main)

    This document can not be used without Samsung’s authorization. 5. PCB Diagrams 5. PCB Diagrams 5-1 PCB Diagrams (Main) (This Document can not be used without Samsung’s authorization) Parts Number Part Name Function and Rule RY201 RY-Source Relay This is relay which control source of DLB, BAKE, BROIL, W/Drawer...

  • Page 57: Pcb Diagrams (Sub)

    This document can not be used without Samsung’s authorization. 5. PCB Diagrams 5-2 PCB Diagrams (SUB) (This Document can not be used without Samsung’s authorization) Parts Number Part Name Function and Rule CN180 HASS Connector This is connector for HASS .

  • Page 58: Pcb Diagrams (Main)

    This document can not be used without Samsung’s authorization. 5. PCB Diagrams 5-3 PCB Diagrams (Main) (This Document can not be used without Samsung’s authorization) 1. UART-MAIN-TX-SUB-RX 1. DOOR SENSING 2. UART-MAIN-RX-SUB-TX 1. DOOR-CONTROL & 2. NC 3. NC TEMP-S-BROIL 4.

  • Page 59: Pcb Diagrams (Sub)

    This document can not be used without Samsung’s authorization. 5. PCB Diagrams 5-4 PCB Diagrams (Sub) (This Document can not be used without Samsung’s authorization) 1. 5V 1. UART-OVEN-TX-PANEL-RX 2. UART-OVEN-RX-PANEL-TX 2. GND 3. DIS-DIO 3. NC 4. DIS-CLK 4. INT 5.

  • Page 60: Wiring Diagrams

    This document can not be used without Samsung’s authorization. 6. Wiring Diagrams 6. Wiring Diagrams 6-1 Wiring Diagrams (This Document can not be used without Samsung’s authorization)

  • Page 61: Schematic Diagrams

    This document can not be used without Samsung’s authorization. 7. Schematic Diagrams 7. Schematic Diagrams 7-1 Schematic Diagrams (This Document can not be used without Samsung’s authorization)
  • Page 62 GSPN (GLOBAL SERVICE PARTNER NETWORK) Area Web Site Europe, CIS, Mideast & Africa gspn1.samsungcsportal.com Asia gspn2.samsungcsportal.com North & Latin America gspn3.samsungcsportal.com China china.samsungportal.com © Samsung Electronics Co., Ltd. January. 2018 Printed in Korea...

This manual is also suitable for:

Ne59n6630ssNe59n6630ss/aa

Table of Contents