Parkside PWH 2800 A1 Translation Of The Original Instructions page 143

Hide thumbs Also See for PWH 2800 A1:

Table of Contents

Available languages

143

Table of Contents

Show Quick Links

Quick Links:
English

Hide quick links:

Chapters

Table of Contents

Need help?

Do you have a question about the PWH 2800 A1 and is the answer not in the manual?

Questions and answers

Mr L David

February 13, 2025

The motor is running although the blockage has been cleared and the cutting roll move freely by had

1 comments:

Mr. Anderson

February 13, 2025

If the motor on the Parkside PWH 2800 A1 is running despite the blockage being cleared and the cutting roll moving freely, it could be due to the restart lock feature. When the device shuts down automatically due to overload, it does not restart automatically. To restart it, follow these steps:

1. Allow the motor to cool.
2. Turn the rotary switch to the OFF position.
3. Press the reset button.
4. Turn the device on again.

If these steps are not followed, the motor may run without engaging the cutting roll properly.

This answer is automatically generated