Jura IMPRESSA C50 Instructions For Use Manual page 12

1 Preparing and using for the first time
First-time use without filter
cartridge activation
12
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml.
SWITCH CLOSE
j T Turn the switch to the o position.
SYSTEM FILLING
, the machine heats up.
HEATING
, the system is rinsed. Water flows out of the cof-
RINSING
fee spout. The rinse stops automatically.
appears on the display. Your IMPRESSA is ready for use.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
appears briefly on the display.
OK
16 °dH
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 'Preparing and using for the first
time – Determining the water hardness').
g T Turn the Rotary Switch to change the water hardness set-
ting, e.g. to
25 °dH
k T Press the Rotary Switch.
appears briefly on the display.
OK
FILL TANK
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
appears on the display.
, the system fills up with water.
FILTER -
.
, the light segment on the switch lights up.
ESPRESSO
/ is displayed.
NO