Acceleration/Deceleration - Pulseroller ConveyLinx-Ai2 User Manual

PULSEROLLER

7.1.4.5. Acceleration/Deceleration

Acceleration and Deceleration settings are fields you enter values similar to Speed. The units of the value
you enter are in mm which means that the control will accelerate and decelerate for the distance specified
within the controller's current limits and the mechanical limits of the connected drive train.
In this example, clicking Set All will download the
selected setting to the Left MDR of all modules
entered in the range of Nodes at the top of the
main screen in the From Node # / To Node #
boxes. If for example these boxes had the values
of 1 and 6; changing the selection in the Motor
Type pull down will change Node 1 and clicking
Set All will change Nodes 2 thru 6 to the same
setting as Node 1
ConveyLinx-Ai2 User's Guide - 1.7
Last modified: Aug 18, 2020
Page 95 of 154