• SET UP YOUR PHONE
Use the Optional headset
The HDB-4 may be purchased with your phone or separately as an accessory.
Connect the headset
Plug the headset jack into the Pop-Port
1
connector at the bottom end of your phone.
2
Position the headset on your ear
as it appears in the illustration to
the right.
With the headset connected, you
can make, answer, and end calls
as usual.
•
Use the keypad to enter numbers
t
•
Press
to place a call
e
•
Press
to end a call
Adjust display brightness
1
Press Menu 4-4-5 (Settings > Display settings > Display brightness).
After a brief pause, a bar chart appears in the display indicating the
current brightness level.
2
Press
Change the Xpress-on
Important: Before changing covers, ensure the phone is powered
off and disconnected from the charger or any other device. Always
store and use the phone with the covers attached.
or
to adjust the brightness to your preference.
TM
[ 31 ]
TM
covers
Basic operations