Nokia 3250 User Manual page 52

Password — If you leave the password field blank, every time you try to connect to your remote mailbox, you
need to enter the password. Otherwise, the password is sent automatically.
Incoming mail serv.: — the IP address or host name of your service provider's incoming e-mail server
Access point in use — the Internet access point (IAP) used for the mailbox. See
Mailbox name — a descriptive name for the mailbox
Mailbox type — defines the e-mail protocol used. This setting can be selected only once and cannot be changed
if you have saved or exited from the mailbox settings.
Security (ports) — security protocol used in the connection to the remote mailbox
Port — To define another port than the default for the remote mailbox connection, select
enter the port number.
APOP secure login (only POP3 mailboxes) — Select
server.
Outgoing e-mail
Select Connection settings
My e-mail address — the e-mail address given to you by your service provider. The address must contain the @
character. Replies to your messages are sent to this address.
Outgoing mail serv. — Write the IP address or host name of your service provider's outgoing e-mail server.
For User name, Password,
mailboxes, p. 51.
User settings
Select User settings and from the following settings:
My name — Enter the name to be displayed in outgoing e-mail.
Send message (network service) — To set when your e-mail messages are sent, select
next conn..
> Outgoing e-mail and from the following settings:
Security (ports), and Port
Copyright © 2006 Nokia. All rights reserved.
On to encrypt the sending of passwords to the remote e-mail
settings, see settings for
Connection p. 96.
User defined
Incoming e-mail in Settings for
Immediately
and
or During
52