pela tools SUN9B Manual page 10

Adjust the headband
1) Move the headband in the direction of the arrow to adjust the depth of the headband. Adjust
the headband for a suitable position.
2) Adjust the distance between the welder's eyes and the filter cartridge (left-right side is adjusted
symmetrically).
3) With the knob on the back of the headband, adjust the size of the headband (release or tighten).
4) The angle of inclination between the welding helmet and the face of the welder can be adjusted,
adjust for a suitable position.
• This model is designed and equipped with a balanced suspension mechanism (up & down).
When turning the helmet over the welder's head, the helmet is held in this position by gravity.
The centre of gravity of the helmet is thus shifted backwards, which makes it feel more com-
fortable to use than before during work. Adjust how easy it should be to fold the helmet up and
down using the two knobs.
1) Helmet shell
2) Auto darkening filter
3) Complete headband. Part. No.: 510103
4) Headband knob
5) Front cover lens. Art. No.: 510101
6) Inside cover lens. Art. No.: 510102
7) Sweatband (cloth). Art. No.: 510100
8) Headband top pad
9) Front headband
10) Headband back pad
11) Headband regulator assembly (release-
tighten)
12) Left band & Right band
13) Angle adjusting shim (left) & Angle adjust-
ing shim (right)
14) Headband fixing screw x2
15) Headband rack (left) & Headband rack
(right)
10 10