Connect The Headset; Change Xpress-On™ Covers; Remove The Back Cover And The Battery - Nokia 2116 User Manual

S e t u p y o u r p h o n e

■ Connect the headset

A compatible headset may be
included with your device or
purchased separately as an
enhancement. (See "Enhancements",
page 71.)
1. Plug the headset connector into
the Pop-Port™ connector at the
bottom end of your device.
2. Position the headset on your ear.
With the headset connected, you
can make, answer, and end calls
as usual.
• Use the keypad to enter
numbers.
• Press the call key to place a
call.
• Press the end key to end a call.
18 Copyright © 2005 Nokia. All rights reserved.
■ Change Xpress-on™
covers
Before removing the cover, always
switch off the power and disconnect
the charger and any other device.
Avoid touching electronic
components while changing the
covers. Always store and use the
device with the covers attached.
Remove the back cover and
the battery
See "Remove the back
page 15 and "Remove the
page 16 for instructions on
removing the back cover and the
battery.
Remove the front cover
Gently pull the bottom of the front
cover away from the rest of the
device, and remove the front cover.
cover",
battery",