Technical Data; Data Sheet - SICK RE300 Operating Instructions Manual

9

TECHNICAL DATA

9 Technical data
9.1

Data sheet

16 O P E R A T I N G I N S T R U C T I O N S | RE300
Table 1: Data sheet
Safety-related parameters
B
10d
PFH
1)
D
Type
Actuator coding level
Safe state in the event of a fault
T (mission time)
M
General data
Housing material
Enclosure rating
Function
Operating temperature
Storage temperature
Switching voltage U
max
Max. switching current
2)
RE300
Shock resistance
Vibration resistance
Safe switch on distance S
ao
Safe switch off distance S
ar
Type of connection
RE300-DA..
Cable material
Wire material
Coupling nut material
Cable diameter
Wire cross-section
Bend radius (for fixed installation)
Bend radius (for flexible use)
Max. cable length
1) At low load with a switching frequency of 1 operation/minute, 24 hours/day, 365 days/year, there are
525,600 switching operations per year.
2) For UL Class 2 applications the maximum switching capacity is limited to 5 W.
3) There must not be any ferro-magnetic material near the read head or actuator. All data apply for approach
from the front and alignment offset m = 0.
20 × 10 with low load (EN ISO 13849-1)
6
2.5 × 10 –8
Type 4 (EN ISO 14119)
Low coding level (EN ISO 14119)
The switch has no internal fault detection and is unable
to assume a safe state in the event of a fault. Fault
detection is performed by the connected safety-related
logic unit.
20 years (EN ISO 13849)
Vistal®
IP 67 (IEC 60529)
Magnetic
–10 °C ... +55 °C
–25 °C ... +70 °C
30 V DC
30 mA
30 g/11 ms
10 ... 55 Hz, ampl. 0.35 mm ±15%
5 mm
3)
15 mm
Cable with flying leads
PVC
Copper
Zinc die cast, nickel plated
5.8 mm
0.25 mm²
> 12 × cable diameter
> 15 × cable diameter
Overall resistance < 75 Ω
8027267/1CZ3/2022-11-28 | SICK
Subject to change without notice