Table of Contents
Advertisement
5
Install the New Controller
1. Use perforated label paper to mark where you want to install
the smart controller.
2. Drill holes for the anchors at the marked places using the
corresponding bit to drill through the drywall.
3. Use a hammer to tap lightly until each anchor point is in place.
4. Connect sprinkler wires according to the corresponding labels.
5. Install the product according to the fixed position.
Pro tip:
If you're replacing an old controller with our Wi-Fi control-
ler, be sure to mount the new controller within range of the Wi-Fi
network.
Connect Wires
Referencing the photo of your previous wiring, attach
one wire from each valve to a "Common" (COM) termi-
nal and the other wires to a numbered terminal (only
one wire per terminal).
AC
M
1
2
24V
一
1. COM Wire:
Common wire – Imolaza contains 2 "COM" terminals and you can
connect it to any one of the "C" terminals.
AC
3
4 S1 S2
24V
COM COM
＋
6
Advertisement
Table of Contents
