Advertisement
Please read this manual carefully before operating your set and retain it for future reference.
Speaker design and connection method may be different according to models.
Wireless Receiver Connection Manually
If the rear speakers do not make sound, try to connect manually.
Set the distance between the sound bar and the wireless receiver as close as possible and keep them away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
When you turn on surround function, you can enjoy magnificent surround sound for all the input sound source with rear speakers.
The initial setting for the surround function is OFF, turn the surround function ON to use it.
SK5Y
Surround On: Press and hold REAR + button on the remote control about 2 seconds.
Surround Off: Press and hold REAR - button on the remote control about 2 seconds.
SK10Y/SK9Y/SK8Y/SK6Y
Surround On: Press and hold AUTO VOL button on the remote control about 2 seconds and then press AUTO VOL button repeateadly to select ON - SURROUND in the display window.
Surround Off: Press and hold AUTO VOL button on the remote control about 2 seconds and then press AUTO VOL button repeateadly to select OFF - SURROUND in the display window.
SL4Y/SL5Y/SL5YF/SL6Y/SL6YF/SL7Y/SL7YF/SL8Y/ SL8YG/SL9Y/SL9YG/SL10Y/SL10YG/ SN5Y/SN6Y/SN7CY/SN7Y/SN8Y/SN8YG/SN9Y/ SN9YG/SN10Y/SN10YG/GX
Surround On: Press and hold button on the remote control about 3 seconds and then press
button repeateadly to select ON - SURROUND in the display window.
Surround Off: Press and hold button on the remote control about 3 seconds and then press
button repeateadly to select OFF - SURROUND in the display window.
SP9YA/DSP9YA/SP8YA/DSP8YA/SP7Y/DSP7Y/SPD7Y/SP70Y/DSPD7Y/SPD75YA/DSPD75YA/ SP60Y
Press Settings button. The product enters the setting mode and you can see "OFF-AUTO POWER" or "ON-AUTO POWER".
While the "OFF-AUTO POWER" or "ON-AUTO POWER" is scrolling in the status display, press Left/ Right button to select the surround sound setting. You can see the status of the surround sound, "OFFSURROUND" or "ON-SURROUND".
While the "OFF-SURROUND" or "ON-SURROUND" is scrolling in the status display, press Up/Down button to turn on or off the surround sound.
Specification of Wireless reciever
Power requirement | Refer to the main label on the wireless receiver. |
Power consumption | Refer to the main label on the wireless receiver. |
Dimensions (W x H x D) | Approx. 60.0 mm x 220.0 mm x 175.0 mm |
Design and specifications are subject to change without notice.
In all cases of difficulty - consult your LG dealer from whom the product was purchased
Website: www.lg.com
LGEUK Website: www.lg.com/uk
(Service website: www.lg.com/uk/support)
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the SPK8-S and is the answer not in the manual?
Questions and answers