Harman JBL TUNE 510BT - Wireless Headphones Quick Start Guide

WHAT'S IN THE BOX

POWER ON & CONNECT

MANUAL PAIRING

BUTTON COMMAND

MULTI-POINT CONNECTION

1. To switch music source, pause the music on the current device and select play on the 2 nd device.
2. Phone call will always take priority.
3. If one device goes out of bluetooth range or powers off, you may need to manually reconnect the remaining device.
4. SELECT "forget this device" on your bluetooth devices to disconnect multi-point.

CHARGING

LED BEHAVIORS

1

		LOW BATTERY
		CHARGING
		FULLY CHARGED

2

		POWER ON/OFF
		BT CONNECTING
		BT CONNECTED

TECH SPEC

Model:	TUNE 510BT
Driver Size:	32 mm / 1.26 " Dynamic driver
Power supply:	5V 1 A
Weight:	160 g / 0.35 lbs
Headset battery type:	Lithium-ion battery (3.7V / 450 mAh)
Charging time:	2 hrs
Music playtime with BT on:	up to 40 hrs
Frequency response:	20 Hz – 20 kHz
Impedance:	32 ohm
Sensitivity:	103.5 dB SPL@ 1kHz 1mW
Maximum SPL:	95 dB
Microphone sensitivity:	-29 dBV@1kHz/Pa
Bluetooth version:	5.0
Bluetooth profile version:	A2DP v1.3, AVRCP v1.6, HFP v1.7
Bluetooth transmitter frequency range:	2.4 GHz – 2.4835 GHz
Bluetooth transmitted power:	<8 dBm
Bluetooth transmitted modulation:	GFSK, π/4DQPSK,8DPSK
Maximum operation temperature:	45°C

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

FCC ID: APIJBLT510BT
215-JCD077

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Harman JBL TUNE 510BT - Wireless Headphones Quick Start Guide