Using The Replaceable Parts List - Tektronix P6131 Instruction Manual

Replaceable Parts

Using the Replaceable Parts List

Parts list column descriptions
Column Column name
1 Figure & index number
2 Tektronix part number
3 and 4 Serial number
5 Qty
6 Name & description
7 Mfr. code
8 Mfr. part number
Abbreviations
Mfr. Code to Manufacturer
Cross Index
18
This section contains a list of the replaceable mechanical and electrical compo-
nents for the P6131 probe. Use this list to identify and order replacement parts.
The table below describes the content of each column of the parts list.
Description
Items in this section are referenced by figure and index numbers to the exploded view
illustrations that follow.
Use this part number when ordering replacement parts from Tektronix.
Column three indicates the serial number at which the part was first effective. Column four
indicates the serial number at which the part was discontinued. No entry indicates the part is
good for all serial numbers.
This indicates the quantity of parts used.
An item name is separated from the description by a colon (:). Because of space limitations, an
item name may sometimes appear as incomplete. Use the U.S. Federal Catalog handbook
H6-1 for further item name identification.
This indicates the code of the actual manufacturer of the part.
This indicates the actual manufacturer's or vendor's part number.
Abbreviations conform to American National Standard ANSI Y1.1–1972.
The table titled Manufacturers Cross Index shows codes, names, and addresses
of manufacturers or vendors of components listed in the parts list.
P6131 Instruction Manual