Advertisement
4-1.
Remove the
funnel and install a cooler.
4-2.
Connect the cooler and
the cooling bucket with
stainless-steel hoses.
Coil pipe opening
4-4.
Connect it with a
rubber hose; turn
on tap water.
4-3.
Air intake
(used to keep an
appropriate pressure
inside the pot
without vacuum)
Connect the outlet for
collecting hydrosols and the
cooling bucket's pipe coil
with an L-shaped elbow.
Attention!
Cooling bucket
Keep the air intake on
a rubber hose at the
junction of large and
small steel pipes for
normal suction.
4
4-5.
Connect it with
a rubber hose
Check valve
Advertisement
