Technical Data - joule JPSH01 Installation And Operation Manual

Table 1 – Power button functions
Action
Press and hold for ≤ 3 seconds
Press and hold for > 3 seconds
Press and hold for 4-9 seconds
Press and hold for ≥ 10 seconds
Press 5 times in 4 seconds
Table 2 – Power button LED indication
Color Status
Blue on
flickering
Green on
flickering
Purple blinking fast
Red blinking
blinking 3 times
Yellow on
White blinking 3 times
off
Blinking means that the LED is on for 500 ms, and then is off for 500 ms.
Blinking fast means that the LED is on for 100 ms, and then is off for 100 ms.
Flickering means that the LED is on for 3,000 ms, and then is off for 300 ms.

1.2 Technical Data

Table 3 – Basic technical specification
Parameter
Model
Communication Standard
Operating frequency
Wi-Fi coverage area
Integration
Server
IR angle
IR wavelength
Room area
Power
Description
Switching the device from off to on state and vice versa
Fault condition reset (blinking red)
Switching to activation mode in the Perenio Smart mobile app
Factory reset
Mechanical unlock of the childproof mode
Description
The device is connected to the mains and activated in the mobile app, but the
heating mode is switched off
The device is connected to the mains, but not activated in the mobile app, and
heating mode is switched off
The device is connected to the mains and activated in the mobile app, and the
heating mode is switched on
The device is connected to the mains, but not activated in the mobile app, and
heating mode is switched on
The device is connected to the mains, and the process of activation in the
mobile app was started
The device is connected to the mains, but an error has occurred (Incorrect
orientation, safety mechanism actuation, etc.)
Factory reset process was initiated
The device is connected to the mains, and the temperature maintenance
mode is on (for remote control via the mobile app only)
The device is not connected to the mains, or a power failure occurred
The device is connected to the mains and activated in the mobile app, but the
heating mode is switched off
Value
JPSH01 (white), JPSH02 (black), JPSH03 (silver), JPSH04 (gold), JPSH05
(green), JPSH01V (white), JPSH02V (black)
Wi-Fi (IEEE 802.11b/g/n), 18.2 dBm max (~66 mW)
2400-2483.5 GHz
up to 100 meters (open areas)
Yandex Smart Home, Amazon Alexa
Cloud
Up to 300° (depending on installation location)
95-100 µm
2
Up to 24 m
Nominal input voltage: 220 V
Rated input current: 3.0 А
Rated power: 600-700 W
Supply voltage: 220-230 VAC, 50 Hz
Version: 1.1.1
Page 11 of 36