Nexigo N960E User Manual page 13

A: Connect the camera to any USB 2.0 or USB 3.0 port.
It will take a few seconds for the camera to be
recognized after it is connected to the system. To
ensure the camera has installed correctly on a
Windows computer; check under
System and Security>Device
To verify the webcam is connected on a Mac computer,
click the Apple Menu
screen) and then click
Report from the pop-up window that appears. The
System Information window for your Mac will appear.
Navigate to the
is listed as a connected device (like the photo below):
(in the top left corner of your
About this
USB section and check if the webcam
Control Panel>
Manager.
Mac. Click on System
US 10