Receiving Call Alerts; Call Alert Queue - Motorola iDEN i50sx User Manual

Ready to Alert Screen
Ready to Alert is used to confirm your request for the alert and to prompt you
to push the PTT button:
• If you press the PTT button, the Call Alert is sent, and the phone displays
the Recent Calls screen.
For Call Alerts placed from the keypad, pressing A under CANCEL
•
causes the phone to return to the dialing screen with the previously entered
number displayed.
For Call Alerts placed from the Phonebook, pressing A under CANCEL
•
causes the phone to return to the Phonebook screen.
• If you do nothing, the phone will revert to the idle screen.

Receiving Call Alerts

When you receive a Call Alert, your phone emits a chirp and displays the name
or number of the caller. You can answer, queue, or clear the Call Alert:
• To answer the Call Alert, press the PTT button and begin talking after the
phone emits a chirping sound.
To queue the Call Alert, press B under QUEUE.
•
To clear the Call Alert, press A under CLEAR.
•
NOTE: Until you answer, queue or clear the Call Alert, you will not
receive any additional phone, Private or Talkgroup Calls.
USER TIP:You can turn down the Call Alert chirp volume by pressing
the volume buttons on the side of your phone.

Call Alert Queue

Call Alert queuing enables you to save up to eight Call Alerts in a list, or queue.
To store a Call Alert in the Call Alert Queue, press B under QUEUE when you
receive an incoming Call Alert.
Accessing the Call Alert Queue
From the idle screen, press m.
1
110
nextel.com