Phono In Mode; Optical In Mode - Arylic B50 User Manual

7.4 Phono in Mode

B50 is also a turntable amplifier, you can connect your turntable to the Phono in connectors and the GND
connector to play music. Press the Mode button on the device, use the remote controller or in the Go
Connect APP to switch to Phono in mode. The Phono LED will turn on when you in Phono in mode.
You can also stream turntable audio through Bluetooth and listen from connected Bluetooth receiver
devices such as Bluetooth speakers or Bluetooth headphone.
Please note, compare to Line in mode, Phono in mode has a very high amplification due to the low volume
of turntable. DO NOT connect any analog device line out to Phono in, it will create a very loud voice and
risk of damaging the device and connected speakers.

7.5 Optical in Mode

You can connect any device with digital optical output to B50. You can press the Mode button on the
device, use the remote controller or in the Go Connect APP to switch to Optical in mode. The OPT LED will
turn on when you in Optical in mode.
You can also stream Optical in audio through Bluetooth and listen from connected Bluetooth receiver
devices such as Bluetooth speakers or Bluetooth headphone.
12