Selecting A Preset Station; Other External Components; Hdmi/Av-In Devices - Kenwood DMX7522S Instruction Manual

Radio Radio
Manual presetting
1
Select the band, and then tune in to a
station you want to preset.
On the source control screen:
FM1 FM3
2
Select a preset number to store into.
Radio
AM FM1
The station selected in step 1 is stored into the
preset number [P1] to [P5] you have selected.

Selecting a preset station

1
Select the band, and then display the
preset station window.
On the source control screen:
2
Select a preset station.
Radio
AM FM1
P1
FM1
P2
FM1
P3
FM1
P4
FM1
P5
(Hold)
FM1
• To show the details of the item, touch [< ].
• You can also select a preset channel by touching
[P1] – [P5].
To hide the window: Touch [ > ].
FM1 FM3
P1
FM1
P2
FM1
P3
FM1
P4
FM1
P5
FM1

Other External Components

Other External Components

HDMI/AV-IN devices

Connecting external components
See page 46.
Using the HDMI device
When using the HDMI device, you cannot use wireless
Apple CarPlay and wireless Android Auto.
Preparation:
• Select [HDMI] for the <Wireless/HDMI SETUP>
setting when using the HDMI device connected to
the HDMI terminal (page 39).
1
Select [HDMI] as the source.
From the Home screen (page 3), touch as
follows:
• If <Wireless/HDMI SETUP> is not set to [HDMI],
the confirmation screen appears. Touch [HDMI]
and then touch [OK] on the confirmation screen.
2
Turn on the connected HDMI device and
start playing the source.
Using the AV-IN component
Preparation:
• Select [AV-IN] for the <AV Input> setting when
connecting the external AV device to the AV-IN
terminals (page 37).
ENGLISH 23