Configuring Virtual Disk - NEC BladeServer Express5800 Series User Manual

4-52 Configuring Your Server

Configuring Virtual Disk

This section describes the procedures for configuration of VD (virtual disk) using WebBIOS.
Configuration Wizard
When you click [Configuration Wizard] on WebBIOS top menu, the screen as shown below appears.
Select the relevant operation, and click [Next] at lower right of the screen.
Clear Configuration
New Configuration
Add Configuration
Allows you to clear existing configuration.
Clears the existing configuration and creates a new VD. If you have
any existing data in the earlier defined virtual disk, the data will be
lost.
Retains the old configuration and then adds new virtual disk.