ACME BH102 - Bluetooth Earphones Manual

Table of Contents

Contents

1 Technical specifications
2 Product overview
3 Charging
4 Pairing process and LED indications
5 Troubleshooting
6 Care and maintenance
7 Waste electrical and electronic equipment (Weee) symbol
8 Warranty period
9 EU Declaration
10 Documents / Resources
- 10.1 Download manual

Technical specifications

Type: In-ear
Frequency response: 20–20 000 Hz
Driver size: 13 mm
Sensitivity: 94dB+/-3dB
Connections: Micro USB, Bluetooth
Bluetooth version: V4.2
Working distance (Bluetooth): up to 10 m
Power supply: micro USB, 5 V DC
Battery: Li-ion
Charging time: up to 1 hour
Standby time: about 120 hours
Playback time: up to 3 hours
Talking time: up to 3 hours
Weight: 12 g

Listening at a high volume for a long time may damage your hearing.

Product overview

Overview

1	Volume up / Next track button	Press the button to go to the next track; press and hold the button to increase the volume. When the max. volume is reached, an indication sound will be heard.
2	Volume down / Previous track button	Press the button to go to the previous track.; press and hold the button to reduce the volume.
3	Power (Multi-function) button	Power on: Press and hold the button for 3 seconds. Power off: Press and hold the button for 3 seconds. Answer phone call: Press the button once. Reject phone call: Press and hold the key for 2 seconds End call: During a phone call press the button once. Redial last phone number: Press the key twice. Play/Pause: press the button once to pause the multimedia playback; press again to resume.
4	Micro USB charging port	To charge the battery, use the charger with a USB port and Micro USB cable.
5	Microphone	For voice communication
6	LED Indicator*	Shows the status of earphones.

* LED indicator is located under the Volume up button.

Charging

warning These headphones are equipped with a built-in non-detachable rechargeable battery. Please ensure that the battery is fully charged before using the headphones for the first time. A solid red LED light indicates when the battery is charging. When the charging is complete, the LED light will turn blue. The typical charge time for an empty battery takes up to 1 hour. If you do not use the device for a long period of time, please charge it once every 2 months to avoid damage to the battery.

warning Li-Ion/Pi-Po batteries exhibit a gradual decrease in performance over their service life, so a reduction in the initial battery capacity is not an indication of a faulty battery or device.

Pairing process and LED indications

Power on your headphones by pressing Power button for 3 seconds. A fast blinking red/blue LED will indicate that the headphones are ready to pair.
Turn on the Bluetooth function on your device, select BH102 from the list and pair the headphones.
A continuously glowing blue LED will indicate that your device has been successfully paired and the headphones are ready to use.
When sound is being played through headset – a blue LED blinks every 5 seconds.
If the headphones are disconnected and not used for 5 minutes, the headphones will automatically turn off.

Troubleshooting

The headphones cannot be turned on	Recharge your headphones
Music is not playing	Make sure that both devices are paired and connected and that "Media playback" is enabled in your Bluetooth settings. Make sure your device has an "A2DP" Bluetooth profile.
Bluetooth device will not reconnect/pair with the headphones	Open the Bluetooth settings on your device, tap "BH102" and select "Forget". Now you can try the pairing operation again. It is possible that you are not able to connect because the Headphones are paired with another nearby device. You will have to disconnect the other device, or even turn off its Bluetooth function. Now you can try again to pair or reconnect. Turn on/off the Bluetooth function in your device or restart the device itself (not the headphones).

Care and maintenance

Don't use abrasive cleaning solvents to clean the headset.
Do not expose the headset to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
Don't dispose of the headset in a fire as it will result in an explosion.
Don't expose the headset to contact with sharp objects as this will cause scratches and damage.
Don't let the headset fall down onto the floor. The internal circuit might get damaged.

Waste electrical and electronic equipment (Weee) symbol

The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect contact your local authority, your household waste disposal service provider or the shop where you purchased the product.

Warranty period

Warranty enters into force starting with the day when the buyer acquires the product from the seller. Warranty period is indicated on the package of the product.

EU Declaration

ACME Europe hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of:
"RED 2014/53/es" Directive;
"RoHs 2011/65/eu" Directive.

The declaration of conformity can be accessed at: http://www.acme.eu/en-us/declarationsconformity