Rohde & Schwarz R&S CMW500 User Manual page 59

®
R&S CMW500
The UE synchronizes to the DL signal and attaches. A default bearer is estab-
lished.
Note the connection states displayed in the main view and wait until the attach pro-
cedure is complete.
By default, the RRC connection is kept after the attach is complete.
10. The default bearer and the established RRC connection are usually sufficient for
testing.
If you want to set up a dedicated bearer, press the "Connect" hotkey.
Note the connection states displayed in the main view and wait until the connection
has been established.
11. Use the "LTE TX Meas" softkey to switch to the multi-evaluation measurement.
The measurement application is opened and the combined signal path scenario is
selected automatically. Furthermore the frame trigger signal provided by the "LTE
Signaling" application is selected as trigger source.
12. To start the measurement, right-click the "Multi Evaluation" softkey and click ON.
The main view provides an overview of the measurement results.
13. To enlarge a diagram presented in the main view, double-click it.
The following example shows the enlarged "Spectrum Emission Mask" view.
User Manual 1173.9463.02 ─ 17
Getting Started
Trying Out the Instrument
41