Table of Contents
Advertisement
Installation (continued)
Mounting the projector to the attachment plate
Attach the projector mounted with the projector mount bracket to the attachment plate that already installed to the
wall or ceiling.
r Install the projector to a wall
Attention
z For wall mounting, set the pole of the projector at the upper end and the lengthwise direction of the power
supply unit vertically, and then perform the mounting work.
Ball joint fixing screw
Projector mount bracket
20 - ENGLISH
Shaft
Groove
Attachment plate
Shaft
Groove
1) Change the orientation of the main unit of the
projector.
z Refer to "Changing the orientation of the main
unit of the projector" ( page 17), adjust the
orientation of the main unit of the projector as
shown in the left illustration and then fasten the
ball joint fixing screw.
2) Attach the groove of the projector mount
bracket to the shaft of the attachment plate.
Warning:
The mounting and installation must be carried out
by two or more persons.
3) Attach the projector mount bracket to the
attachment plate.
z Slide the projector mount bracket as shown in
the left illustration and make the groove of the
projector mount bracket held on to the shaft of
the attachment plate.
Attention
z Do not release your hand until the shaft of the
attachment plate is fitted into the groove of the
projector mount bracket.
Advertisement
Table of Contents
