Graphic User Interface (Gui) Pcb - Planmeca ProMax Technical Manual

REPLACING PCBS

4.2 Graphic user interface (GUI) PCB

Detach the user interface according to the instructions given in section "Detaching the user
interface" on page F-8.
Detach the grounding cable from the support plate.
Detach the user interface assembly from the interface box by unscrewing the four PT 3x12 rst
WN1451 Torx screws.
Interface box
Figure 16
Technical Manual
Grounding cable
Chapter F - PATIENT SUPPORT ARM
J3
PT 3x12 rst WN1451 torx
Support plate
User interface assembly
Cover
PT 3x12 rst WN1451 torx
Planmeca ProMax F-13