Emergency Stop - Agilent Technologies Medalist i3070 Series System Installation

Table 1
Label

Emergency Stop

In case of emergency, press the red Emergency Stop switch
power to the system.
Resetting the Emergency Stop
1 Turn the red Emergency Stop switch clockwise to release it.
2 Press the Reset button to reset the safety relay and resume operation.
Figure 1 Emergency Stop Button
viii
Warning Labels on System
Description
WARNING: Pinch Hazard
Do not touch the equipment while it is running. Keep hands away from
the indicated areas to avoid pinched fingers.
DO NOT use the Emergency Shutdown Switch as a substitute for
NOTE
correct power-down (unboot) procedures
Reset Button
(Figure 1) to cut off