Enabling Https; Uninstalling The Certificate - Dahua Technology IVSS User Manual

installation.
Step 5 Install the root certificate on the PC. See "8.6.1.1.1 Installing the Created Certificate" for
detailed information.
This root certificate is the one obtained with signed certificate.

8.6.1.2 Enabling HTTPS

After you install the certificate and enable HTTPS function, you can use the HTTPS on the PC to
access the device.
Step 1 Click
Step 2 Click
Step 3 Click
TLS (Transport Layer Security) provides privacy and data integrity between two
communications application programs.
Step 4 Click Save.
After you successfully save the settings, you can use HTTPS to access the web interface.
Open the browser, enter https://IP address:port in the address bar, and then press Enter,
and the login page is displayed.
● IP address is device IP or the domain name.
● Port refers to device HTTPS port number. If the HTTPS port is the default value 443, just
use https://

8.6.1.3 Uninstalling the Certificate

Uninstall the certificate.
● You cannot use the HTTPS function after you uninstall the certificate.
● The certificate cannot be restored after being uninstalled. Be cautious.
, or click on the configuration page, and then select SECURITY > Credential.
to enable HTTPS function.
to enable Compatible with TLSv1.1 and earlier versions.
Figure 8-92 Credential
IP address
to access.
295
User's Manual