Table of Contents
Advertisement
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to be
found both in this manual and on the product itself.
GB
IE
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE
Visit us at www.aldi.com
AFTER SALES SUPPORT
+44(0) 1904727501
+353(0) 19022605
G
B
E I
support@coreservice.co.uk
MODEL:
GLB3300A
3
818441
YEAR
WARRANTY
09/2022
User Manual
ELECTRIC LEAF BLOWER
Original User Manual
Advertisement
Table of Contents
Related Manuals for FERREX GLB3300A
Summary of Contents for FERREX GLB3300A
- Page 1 ALDI STORES LTD. PO BOX 26, ATHERSTONE WARWICKSHIRE, CV9 2SH ALDI STORES (IRELAND) LTD. PO BOX 726, NAAS, CO. KILDARE Visit us at www.aldi.com AFTER SALES SUPPORT 818441 +44(0) 1904727501 +353(0) 19022605 support@coreservice.co.uk YEAR MODEL: WARRANTY GLB3300A 09/2022 Original User Manual...
-
Page 3: Package Contents
Package contents Package contents Motor housing Collecting bag Top vacuum tube Star grip nut Bottom vacuum tube Screw for extra handle Top blow tube Extra handle Bottom blow tube Shoulder strap Screw (x 4) Tools required (not supplied) PH1 Phillips screwdriver... -
Page 4: Table Of Contents
Table of content Table of content Overview..........................2 Package contents........................3 General information.......................5 Reading and storing the user manual....................5 Proper use............................5 Explanation of symbols......................6 Safety............................. 8 Before first use........................16 Check the device and scope of delivery..................16 Assembly instruction......................17 Installing the blow and vacuum tubes..................17 Attaching the collecting bag......................18 Attaching the extra handle...................... -
Page 5: General Information
General information General information Reading and storing the user manual This user manual is part of the electric leaf blower (hereinafter also called "device"). It contains important information on how to set up and use the device. Before using the device, read the operating manual carefully, in particular the safety instructions. -
Page 6: Explanation Of Symbols
General information Depending on the type of device, the following risks may occur: - Lung damage if not wearing a suitable dust mask; - Hearing damage if not wearing suitable hearing protection; - Health risks which may result from vibrations on the arm and hand if you use the device for a long time or if it is not properly used or maintained. - Page 7 Explanation of symbols Wear hearing protection. Wear safety shoes. Caution! Risk of injury due to flying scraps! Keep a safe distance when operating the device! Caution! Rotating parts! Warning! Disconnect the mains plug if the cord becomes damaged or entangled. SWITCH OFF: Disconnect the mains plug before cleaning and maintenance work.
-
Page 8: Safety
Explanation of symbols The symbol shows the maximum sound power level L Safety The following signal words are used in this user manual. This signal symbol/word denotes a WARNING! hazard with an average risk level that could lead to death or severe injury if it is not avoided. - Page 9 Safety Workplace safety Clutter or unlit work - Keep your work area tidy and well lit. areas can lead to accidents. - Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or Power tools create sparks which may ignite the dust or dust.
- Page 10 Safety Use of an RCD reduces the risk of electric protected supply. shock. Personal safety - Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, A moment of inattention while alcohol or medication.
- Page 11 Safety - Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety A careless action can cause severe injury within a principles. fraction of a second. Using and handling the power tool - Do not overload the power tool.
- Page 12 Safety The use of power tools for applications other performed. than those intended can lead to dangerous situations. - Keep handles and grip surfaces dry, clean and free of oil Slippery handles and grip surfaces hinder safe and grease. operation and control of the power tool in unforeseen situations.
- Page 13 Safety - Operate the device in a recommended position and only on a solid and level surface. - Do not use the device on paved or gravel surfaces; debris flung out of the device can cause injuries. - Before using the device, always perform a visual inspection to ensure that the shredder, the pins of the shredder and other attachments are secured, that the housing is undamaged and that the safety devices and screens are in place.
- Page 14 Safety - Do not stand in the ejection zone during operation of the device. - When vacuuming up material with the device, take extreme care to avoid sucking up metal objects, stones, bottles, tins or other foreign objects. - Switch the device off and wait until the device has stopped if the cutting mechanism hits a foreign object or if the device starts vibrating heavily.
- Page 15 Safety - Switch the device off and disconnect it from the mains. Make sure that all moving parts come to a complete standstill: • every time you leave the device unattended; • before removing any blockages or clearing clogged ducts; •...
-
Page 16: Before First Use
Safety - If the power cable of the device is damaged, it must be replaced by the manufacturer, the manufacturer's customer service or a similarly qualified person in order to prevent hazards. Before first use Check the device and scope of delivery NOTE! Risk of damage! If opening the packaging with a sharp knife or other pointed... -
Page 17: Assembly Instruction
Assembly instruction Assembly instruction Installing the blow and vacuum tubes 1. Push the top vacuum tube into the large opening on the motor housing until it audibly snaps into place. 2. Push the bottom vacuum tube into the open end of the top vacuum tube until it audibly snaps into place. -
Page 18: Attaching The Collecting Bag
Assembly instruction 1. Using a Philips screwdriver PH1 , screw the screws into the illustrated positions in the clockwise direction. Screw in an additional screw on the opposite side of the motor housing. The blow/vacuum tubes are installed. Attaching the collecting bag 1. -
Page 19: Attaching The Extra Handle
Assembly instruction Attaching the extra handle 1. Attach the extra handle to the mount for the extra handle with the bulge pointing down. The teeth on the mount and on the extra handle must engage. 2. Push the screw for the extra handle through the hole in the mount and in the extra handle. -
Page 20: Adjusting The Extra Handle
Operation Adjusting the extra handle Adjust the extra handle to obtain the optimum working position. Always make sure that the teeth on the extra handle and on the mount engage. 1. Undo the star grip nut 2. Set the desired position of the extra handle. 3. -
Page 21: Setting The Speed
Operation Setting the speed - Set the speed of the device by turning the variable speed control a. Turn the variable speed control to the left (-) to reduce the speed. b. Turn the variable speed control to the right (+) to increase the speed. Turning the device on and off - Slide the ON/OFF switch in the... -
Page 22: Removing The Collecting Bag
Operation Removing the collecting bag - Release the snap hook of the collecting bag from the eyelet on the bottom blow tube - Press in the release on both sides of the connecting piece and pull the collecting bag off the motor housing... -
Page 23: Emptying The Collection Bag
Operation Emptying the collection bag WARNING! With normal use, the collection bag can wear out over time. A worn collection bag can leak small objects and hit and injure the operator or bystanders. - Check the collection bag regularly and replace it if it is damaged. -
Page 24: Connecting The Power Cable
Connecting the power cable 1. Make sure that the ON/OFF switch is in the OFF position (0). 2. Make a loop with the extension cable and guide this through the opening of the strain relief 3. Guide the loop over the hook of the strain relief. -
Page 25: Cleaning And Maintenance
Cleaning and maintenance Cleaning and maintenance WARNING! Risk of electric shock! Improper handling of the device can cause electric shock. - Always switch off the device and pull the mains plug out of the socket before cleaning the device. NOTE! Risk of short circuit! If water or other liquids enter the housing, they can cause a short circuit. -
Page 26: Testing
Testing Testing Regularly inspect the device and its accessories to ensure that they are in fault-free condition and - the controls for damage. - that the accessories are in perfect condition. - that the vents are open and clean. Do not operate a damaged device or accessory. Have the damaged device or accessory checked and repaired by an authorised service centre. -
Page 27: Technical Data
Spare parts Wheels set AUAB011007 Shoulder strap AUAB011009 Technical data Model number: GLB3300A Item number: 818441 Voltage: 230-240V~, 50 Hz Power consumption: 3300 W Idle speed: 9000-15000 min Vacuuming capacity: max. 13 m /min Blow speed: max. 270 km/h Mulching ratio:... - Page 28 Technical data A13+A1+A14+ A2, EN 50636-2-100:2014) and can be used to compare one power tool with another. They can also be used for a preliminary assessment of exposure. Warning! The vibration and noise emissions can deviate from the stated values during actual use of the power tool.
-
Page 29: Declaration Of Conformity
O o-Brenner-Str. 8, 47877 Willich, Germany herewith declare under our own, sole responsibility that our product Electric leaf blower Model No. GLB3300A for cleaning leaves off pavements and similar is in conformity with the following direc Electromagnetic Compatibility Regulations 2016 (UK SI 2016 No. 1091) The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001 (UK SI 2001 No.1701, UK SI 2001 No.3958 Amendment, UK SI 2005 No.3525 Amendment, UK SI 2015 No.98 Amendment) - Page 30 MEROTEC GmbH O o-Brenner-Str. 8, 47877 Willich, Germany herewith declare under our own, sole responsibility that our product Electric leaf blower Model No. GLB3300A for cleaning leaves off pavements and similar is in conformity with the following direc 2006/42/EC Machinery Direc...
-
Page 31: Disposal
Disposal Disposal Disposing of packaging Dispose of packaging according to type. Sort the paperboard and cardboard as waste paper and the film as recyclable material. Dispose of old electrical device Applicable in the European Union and other European countries with systems for separate collections of recyclable waste.
Need help?
Do you have a question about the GLB3300A and is the answer not in the manual?
Questions and answers